Wagner SprayTech 770 owner manual Assemble Your Wagner Paint Crew, Tighten Thread

Page 5

Assemble Your

Wagner Paint

Crew

Start

1 What you’ll need

• Phillips screwdriver

• Wrench (2)

Note: Do not plug in the power cord until assembly is complete.

5465

2

2. Insert handle

6

Before You Start

3

3.On each side of the handle install bolt and tighten wing nut over lock washer

7

TIGHTEN

THREAD

THREAD

4. Thread one end of spray			5. Tighten with wrench			6. Thread other end of spray
hose to outlet valve on sprayer						hose to spray gun
				Before You Start • Assemble Your Wagner Paint Crew
English				Before You Start • Assemble Your Wagner Paint Crew

7.Hold spray gun with one wrench and tighten hose nut with other wrench

5

Image 5

Contents Contents Before You Start Important Safety InformationBefore You Start Questions? What’s in the Box?Tighten Thread Assemble Your Wagner Paint CrewProper Use Functions Using the Wagner Paint CrewUsing the Wagner Paint Crew Important Safety Warning Pressure Relief ProcedurePush Load MaterialSpecial Note What you’ll needHold the Spray Gun Level TipOverlap Your Strokes Spray TechniqueSpray Pattern Keep material flowing smoothly while spraying Solutions if Experiencing Spray IssuesSpray Tip Inlet FilterClear Spray Tip Filter CleanHandle ReplacePull Clean Spray GunTips if Experiencing Spray Issues Instructions are for latex material only Cleanup and StorageStorage Mineral or Startup from Short Term Storage Flush Material From Sprayer Minutes Inlet FilterOIL ComponentsOIL Long TermStorage Troubleshooting Fix Spraying ProblemsProblem E The spray gun leaks Remove Inlet ValveQuantity Parts List Liste de pièces Lista de piezasWarranty Garantie Garantía Limited Warranty for Your Paint Crew