exposed metal parts of the power tool "live" and could give the operator an electric shock.
4. | Always be sure you have a firm footing. |
| Be sure no one is below when using the tool in |
| high locations. |
5. | Hold the tool firmly with both hands. |
6. | Keep hands away from rotating parts. |
7. | Do not leave the tool running. Operate the tool |
| only when |
8. | Do not touch the bit or the workpiece |
FUNCTIONAL DESCRIPTION
CAUTION:
•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.
Switch action
immediately after operation; they may be |
extremely hot and could burn your skin. |
9. Some material contains chemicals which may |
be toxic. Take caution to prevent dust |
inhalation and skin contact. Follow material |
supplier safety data. |
SAVE THESE INSTRUCTIONS.
WARNING:
1
2
008893
CAUTION:
1.Switch trigger
2.Lock button
DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.
Symbols
The followings show the symbols used for tool.
･volts
･amperes
･hertz
•Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.
•Switch can be locked in "ON" position for ease of operator comfort during extended use. Apply caution when locking tool in "ON" position and maintain firm grasp on tool.
To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the switch trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then push in the lock button.
To stop the tool from the locked position, pull the switch trigger fully, then release it.
Reversing switch action
･ alternating current
･no load speed
･ Class II Construction
･ revolutions or reciprocation per minute
･ number of blow
A
B
1
008898
1.Reversing switch lever
This tool has a reversing switch to change the direction of rotation. Move the reversing switch to the
position (A side) for clockwise rotation or the 
position (B side) for counterclockwise rotation.
CAUTION:
•Always check the direction of rotation before operation.
•Use the reversing switch only after the tool comes to a complete stop. Changing the direction of
4