18.Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control.
19.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool ser- viced before using. Many accidents are caused by poorly maintained tools.
20.Use only accessories that are recom- mended by the manufacturer for your model. Accessories that may be suitable for
one tool may create a risk of injury when used on another tool.
SERVICE
21.Tool service must be performed only by qualified repair personnel. Service or main- tenance performed by unqualified personnel may result in a risk of injury.
22.When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury.
SPECIFIC SAFETY RULES |
DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to cordless drill safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury.
1.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.
2.Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical out- let.
3.Always be sure you have a firm footing.
4.Be sure no one is below when using the tool in high locations.
5.Hold the tool firmly.
6.Keep hands away from rotating parts.
7.Do not leave the tool running. Operate the tool only when
8.Do not touch the drill bit or the workpiece immediately after operation; they may be extremely hot and could burn your skin.
9.Some material contains chemicals which may be toxic. Take caution to prevent working dust inhalation and skin contact. Follow material supplier safety data.
4