Makita 6213D instruction manual Symbols

Page 5

SAVE THESE INSTRUCTIONS

WARNING:

MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

SYMBOLS

USD301-1

The followings show the symbols used for tool.

V

volts

n˚

no load speed

....................

 

direct current

.../min

revolutions or reciprocation per

 

 

 

 

minute

IMPORTANT SAFETY INSTRUCTIONS FOR

CHARGER & BATTERY CARTRIDGE

USC001-3

1.SAVE THESE INSTRUCTIONS - This man- ual contains important safety and operat- ing instructions for battery charger.

2.Before using battery charger, read all instructions and cautionary markings on

(1)battery charger, (2) battery, and (3) product using battery.

3.CAUTION - To reduce risk of injury, charge only MAKITA rechargeable batteries marked on the charger label. Other types of batteries may burst causing personal injury and damage.

4.Do not expose charger to rain or snow.

5.Use of an attachment not recommended or sold by the battery charger manufac- turer may result in a risk of fire, electric shock, or injury to persons.

6.To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.

7.Make sure cord is located so that it will not be stepped on, tripped over, or other- wise subjected to damage or stress.

8.An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure:

a.That pins on plug of extension cord are the same number, size, and shape as those of plug on charger;

b.That extension cord is properly wired and in good electrical condition;

5

Image 5
Contents Cordless Driver Drill General Safety Rules SpecificationsWork Area Service Specific Safety RulesSymbols 100 150 Additional Safety Rules for Charger Battery CartridgePage Charging Installing or removing battery cartridgeFunctional Description Trickle charge Maintenance charge Reversing switch action Switch actionElectric brake Speed changeInstalling or removing driver bit or drill bit AssemblyAdjusting the fastening torque Screwdriving operation OperationDrilling operation MaintenanceReplacing carbon brushes Recycling the BatteryAccessories Memo Makita U.S.A., Inc Mail this Portion Factory Service Centers Makita Limited ONE Year Warranty