LED | ON / | Condition |
Color | OFF |
|
Green | OFF | Charger is not operating. |
Red | OFF | Check connections and status |
|
| of 120 VAC circuit. |
Green | ON | 120 VAC is present and char- |
Yellow | ON | ger is operating. |
Red | OFF |
|
Green | ON | 120 VAC is present. Battery is |
Red | OFF | fully charged. |
Yellow | OFF |
|
Green | ON/OFF | Battery Voltage is under 9V. |
Red | ON |
|
Yellow | OFF |
|
6.Periodically check the Battery Char- ger during operation to be sure it does not overheat.
7.Before starting or operating the ve- hicle, unplug and put away the exten- sion cord.
Cleaning and Maintenance.
BEFORE EACH USE, inspect the general condition of the Charger. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition
that may affect its safe operation.
1.After Use, clean external surfaces of the tool with clean cloth.
2.
WARNING! If the supply cord of this Battery Charger is damaged, it must be replaced only by a quali- fied service technician.
Maintenance And
Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from tool failure: Do not use damaged equipment. If abnormal heat occurs, or Charger overheats, have the problem corrected before further use.
SKU 99857 | For technical questions, please call | Page 11 |