Troubleshooting
Problem |
| Possible Causes |
| Likely Solutions |
Tool will not | 1. | No power at outlet. | 1. | Check power at outlet. |
operate. LED | 2. | Cord not connected. | 2. | Check that cord is plugged in. |
lights off. |
|
|
|
|
LED lights on, | 1. | Loose or dirty connection at | 1. | Check connections. Clean and |
but tool does not |
| battery terminals. |
|
|
charge battery |
|
|
|
|
Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.
PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
Parts List
Part | Description | Qty. |
1 | LED Light | 3 |
2 | Top Cover | 1 |
3 | Radiator | 1 |
4 | Printed Circuit Board | 1 |
5 | Bracket C | 1 |
6 | Bracket B | 1 |
7 | Bottom Cover | 1 |
8 | Power Cable | 1 |
9 | Bracket A | 1 |
10 | 2.5 x 12 Self Tapping Screws | 4 |
11 | Transformer | 1 |
12 | Output Wires | 1 |
SKU 99857 | For technical questions, please call | Page 12 |