Apple MP1100 manual Optional Feature, Connecting and Disconnecting myPower

Page 8

Connecting and Disconnecting myPower

You can connect myPower to your computer to transfer and manage music on iPod. myPower includes FireWire and USB 2.0 ports and cables that will enable you to connect directly from myPower to your computer, without using the iPod Dock Connector Cable.

Optional Feature

Charging a Mobile Phone (Additional Hardware Required)

You can use the USB port on myPower to charge your mobile phone, or any other device that requires up to 5V. To do this, you will need the optional myPower USB charging cable and the

To connect myPower to your computer:

1.Place iPod into myPower.

2.Plug in the myPower FireWire or USB 2.0 cable to the corresponding port on your computer.

3.Plug the opposite end of the cable into the appropriate port on the bottom of myPower.

4.Download and manage music with iPod as you would normally.

myPower

FireWire and

USB Ports

appropriate adapter plug for your mobile phone or other device. You can obtain the optional USB charging cable and adapter plugs from Tekkeon at www.tekkeon.com/mpadapters or at 888-787-5888 or 1-714-832-1266.

To charge your mobile phone, or other 5V device:

1.

Connect the optional USB charging cable into the USB port on myPower.

2.

Connect the opposite end of the cable to the optional adapter plug that fits your mobile phone or

 

device.

Playing Music on External Speakers/Stereo

Using myPower, you can play music from iPod over external powered speakers or a stereo. You need an audio cable with a standard 3.5 mm stereo miniplug. (This type of cable is attached to many external speakers.)

3.

Connect the adapter plug into the power jack on your mobile phone or other device that requires

 

up to 5V.

4.

Switch the myPower charging switch to On.

5.

To stop charging, switch the charging switch to Off, and unplug the USB charging cable.

To play music from iPod:

1.Place iPod into myPower.

2.Connect the speakers or stereo to the Line Out port using an audio cable with a 3.5 mm stereo miniplug.

3.Use iPod controls to play music, and the volume controls on the external music source to adjust the volume.

myPower

Line Out Port

NOTE: As myPower charges your device battery, the battery capacity in myPower will decrease and each light on myPower will begin to turn off in sequence from right to left. When myPower is completely out of battery, the red light will turn off. At this point, you must charge myPower.

6

USER GUIDE

 

7

 

 

 

 

 

 

Image 8
Contents Rechargeable Battery and Dock Tekkeon, Inc. Revision R1Page Contents User GuideUnpacking myPower USB 2.0 Cable MyPowerFireWire Cable Sizing Pads 4 sets OverviewCharging myPower To charge myPower using the iPod power adapterTo charge myPower using the FireWire port Customer SupportUsing myPower TroubleshootingLimited Warranty Placing iPod into myPowerCharging the iPod Battery To charge the iPod batteryTo charge the iPod battery and myPower simultaneously Issue SolutionPlaying Music on External Speakers/Stereo Optional FeatureConnecting and Disconnecting myPower