Shipping Damage, General | Bard WA121 instruction

TABLE 2

ELECTRICAL HEAT SPECIFICATIONS

SINGLE CIRCUIT

			3	1	2	2
	Rated Volts	No. Field		Maximum
	Rated Volts	No. Field	Minimum	External Fuse
	and	Power	Circuit	or Circuit	Field Power	Ground
Models	Phase	Circuits	Ampacity	Breaker	Wire Size	Wire Size
WA121-A00		1	8	15	14	14
A03	230/208-1	1	20	20	12	12
A05		1	27	30	10	10
WA121-K00	115-1	1	17	25	10	10
K02	115-1	1	25	30	10	10
K02		1	25	30	10	10
WA121-G00		1	7	15	14	14
G02	220-50-1	1	13	15	14	14
G03		1	20	20	12	12

Maximum size of the time delay fuse or HACR type circuit breaker for protection of field wiring conductors.

Based on 75° C copper wire. All wiring must conform to NEC and all local codes.

These “Minimum Circuit Ampacity” values are to be used for sizing the field power conductors. Refer to the National Electrical Code (latest revision), article 310 for power conductor sizing.

CAUTION: When more than one field power conductor circuit is run through one conduit, the conductors must be derated. Pay special attention to note 8 of table 310 regarding Ampacity Adjustment Factors when more than 3 conductors are in a raceway.

SHIPPING DAMAGE

Upon receipt of equipment, the carton should be checked for external signs of shipping damage. If damage is found, the receiving party must contact the last carrier immediately, preferably in writing, requesting inspection by the carrier’s agent.

GENERAL

The equipment covered in this manual is to be installed by trained, experienced service and installation technicians.

The refrigerant system is completely assembled and charged. All internal wiring is complete.

The unit is designed for use with or without duct work. Flanges are provided for attaching the supply and return air ducts.

These instructions explain the recommended method to install the air cooled self-contained unit and the electrical wiring connections to the unit.

These instructions and any instructions packaged with any separate equipment required to make up the entire air conditioning system should be carefully read before beginning the installation. Note particularly “Starting Procedure” and any tags and/or labels attached to the equipment.

While these instructions are intended as a general recommended guide, they do not supersede any national and/or local codes in any way. Authorities having jurisdiction should be consulted before the installation is made. See Page 3 for information on codes and standards.

Size of unit for a proposed installation should be based on heat loss calculation made according to methods of Air Conditioning Contractors of America (ACCA). The air duct should be installed in accordance with the Standards of the National Fire Protection Association for the Installation of Air Conditioning and Ventilating Systems of Other Than Residence Type, NFPA No. 90A, and Residence Type Warm Air Heating and Air Conditioning Systems, NFPA No. 90B. Where local regulations are at a variance with instructions, installer should adhere to local codes.

Manual 2100-234IPage 6 of 17

WA121 specifications

The Bard WA121 is a cutting-edge heating and cooling unit that has been designed for residential and light commercial applications. With a focus on energy efficiency and user comfort, the WA121 stands out in the competitive HVAC market. One of its most notable features is its energy efficiency rating, which meets or exceeds the standards set by the Department of Energy. This translates to significant savings on utility bills, ultimately benefiting both the environment and the consumer's wallet.

A key characteristic of the Bard WA121 is its advanced direct expansion system. This feature allows for optimal heat transfer, resulting in quick and effective temperature regulation. The unit is equipped with a high-efficiency scroll compressor that ensures smooth operation and reduced noise levels, making it suitable for installation in residential settings without disrupting daily life.

The versatile design of the WA121 enables it to be used in various applications, from offices and schools to workshops. Its compact structure means that it can be easily integrated into tight spaces while still delivering robust performance. The unit is built to withstand harsh conditions, featuring a durable cabinet that is made from galvanized steel and finished with a weather-resistant powder coating.

Another outstanding feature is the integrated microprocessor control. This technology allows for precise temperature management, ensuring consistent comfort levels throughout the space. Additionally, the WA121 comes with a programmable thermostat option, providing users with the flexibility to optimize energy consumption based on usage patterns.

The Bard WA121 also focuses on user convenience with its easy-to-access maintenance points. The design allows technicians to perform routine service checks and repairs without excessive disassembly, thereby reducing downtime and maintenance costs.

In terms of airflow, the WA121 utilizes a multi-speed fan that can adjust to varying conditions, ensuring that air distribution remains efficient regardless of external temperatures. This adaptability enhances the overall performance of the unit, making it an ideal choice for diverse environments.

Overall, the Bard WA121 is engineered with a blend of efficiency, durability, and user-friendliness that positions it as a reliable solution for heating and cooling needs. With its commitment to performance and innovation, it is a solid investment for those looking to upgrade their HVAC systems.