Anton/Bauer LOGIC Series owner manual Liquid Crystal Display LCD, Hours Minutes

Page 13

LIQUID CRYSTAL DISPLAY (LCD)

The “RealTime” LCD display provides on-the-fly remaining run time estimates in 15 minute increments as well as simultaneously providing remaining capacity information using the traditional “Fuel Gauge” approach. No special adapters or set up is required. RealTime automatically calculates the load and displays capacity information and battery status at all times.

Remaining Runtime

Hours Minutes

 

The large numbers 1, 2 or

3 indicate remaining

 

hours under current load (only one number will

 

display at any one time)

 

 

The pie chart numbers (15, 30, 45, or 60)

 

indicate remaining minutes under current load.

 

The InterActive Segment indicates a FULLY

 

CHARGED battery verified by charger

 

communication

 

 

Top BAR Solid:

Indicates 75% - 96%

 

Top BAR Flashing:

Indicates 50% - 75%

 

2nd BAR Solid:

Indicates 37% - 50%

 

2nd BAR Flashing:

Indicates 25% - 37%

 

3rd BAR Solid:

Indicates 12% - 25%

 

3rd BAR Flashing:

Indicates 12% - 0%

Fuel Gauge Bars

INTERACTIVE:

Indicates 96% - 100%

 

 

- 9 -

Image 13
Contents Digital Battery System Page Table of Contents Page Page Introduction FeaturesPage High Voltage Design Digital Propac ApplicationsDigital Trimpac High Rate Discharge Charging with Logic Series Chargers OVER-DISCHARGED Batteries Hours Minutes Liquid Crystal Display LCDPage RealTime Display Indications Preventative Maintenance Guidelines for Optimum Performance Maximum Life Page Service Specifications Logic Series Digital Battery Limited Warranty