Anton/Bauer LOGIC Series owner manual Service

Page 19

SERVICE

In the unlikely event a DIGITAL battery fails to deliver acceptable performance, it must be returned to the Anton/Bauer Service Department, the only facility qualified and equipped to service the Logic Series DIGITAL batteries and calibrate the electronic components and sensors. Any attempt by the user or any other unauthorized persons to service this battery will surely result in improper calibration of the electronic components resulting in severe battery damage and/or safety hazards to the operator, in addition to voiding any/all remaining unconditional or pro-rated warranty conditions. Therefore:

1.DO NOT attempt to service this battery under any circumstances.

2.DO NOT send this battery for service to anyone other than the Anton/Bauer Service Department.

3.DO NOT rebuild this battery - At the end of its useful life contact the Anton/Bauer Service Department.

4.DO NOT DISPOSE OF THIS BATTERY. This battery contains sealed Nickel-Cadmium cells and must be disposed of properly. Anton/Bauer participates in a recycle program that handles Nickel- Cadmium battery products (see the back page of this manual).

- 15 -

Image 19
Contents Digital Battery System Page Table of Contents Page Page Introduction FeaturesPage High Voltage Design Digital Propac ApplicationsDigital Trimpac High Rate Discharge Charging with Logic Series Chargers OVER-DISCHARGED Batteries Hours Minutes Liquid Crystal Display LCDPage RealTime Display Indications Preventative Maintenance Guidelines for Optimum Performance Maximum Life Page Service Specifications Logic Series Digital Battery Limited Warranty