Cyclades-PR2000
The routing table is displayed by the menu option INFO => SHOW ROUTING TABLE => IPX. For the example, and using only the static route created above, the routing table appears as in Figure 13.2.
Destination | Interface/ Subinterface/ | hops | ticks | Type |
| Remote address |
|
|
|
00000001 |
| 0 | 1 | PrimaryNet |
00A0B000 | Ethernet | 0 | 1 | Connected |
00010001 | Slot1 Node 00602E001100 | 1 | 1 | Static |
00B0C000 | Slot1 | 0 | 1 | Connected |
FIGURE 13.2 ROUTING TABLE FOR THE EXAMPLE
The SAP (Service Advertisement Protocol) Table
In Novell networks, a given server can provide various services. In order for the router to identify these servers, their locations and services are entered into a SAP table in the router. This is done using the menu CONFIG =>IPX => SAP TABLE. The parameters for each entry are shown in the table.
SAP Table Menu CONFIG =>IPX => SAP TABLE
Parameter | Description |
Service Type | Service this server offers. ? provides a list of valid codes. For the server Columbo, in |
| the example, this code is 0166. |
Server Name | In the example, the name is Columbo. |
Service Network | 00000003 |
Number |
|
Server Node | 00602e001111 |
Server Socket | ? provides a list of valid codes. |
Number |
|
Number of Hops | Number of routers between this router and the server. 0 in the example. |
Chapter 13 - IPX | 114 |
