Avocent Cyclades-PR2000 installation manual esir d, Parameter, Description

Cyclades-PR2000

			e
		esir d
	d
n
U
			2

Route

3

1PR3000

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

P
r
e
	f		o
	e
		rred	R u
				t
					e
6
B
a		ute
ck
	up Ro

5

100.10.0.0/16

	FIGURE 9.5 MULTIPLE ROUTES CONTAINING AS 5
CONFIG=>IP=>BGP4=>ACCESS LIST=>ADD
Parameter	Description
Access List Name	Name assigned to list, to indicate which interface and direction it applies to.
Access List Type	The AS Path type allows filtering by AS number; the Dist BGP type allows filtering by
	IP address and the Community BGP type allows filtering by community. In the figure,
	the filtering can be done based either on AS 5 or the address 100.10.0.0/16
Rule Status	Enables the rule.
Default Scope	If the default of the list is permit, the default of each rule must be deny and the
	corresponding rule must define which routes must be discarded. If the default of the
	list is deny, the default of each rule must be permit and the corresponding rule must
	define which routes will be accepted (with all others being discarded).

Chapter 9 - Routing Protocols 81