Cyclades-PR2000
STEP FOUR
If PPP Encapsulation is being used, a type of authentication should be chosen. This is done in the authentication menu.
Authentication Menu CONFIG=>INTERFACE=>SWAN=>AUTHENTICATION
Parameter | Description |
Authentication Type | Local uses the list of users defined in CONFIG=> SECURITY=>USERS=>ADD. |
| Server uses either Radius or Tacacs to authenticate the user. |
| Remote is when this interface is considered to be the user and the other end of the |
| connection performs the authentication |
Username | Applies when Authentication Type is Remote. The username the remote device |
| expects to receive. |
Password | Applies when Authentication Type is Remote. The password the remote device |
| expects to receive. |
Authentication Server | Applies when Authentication Type is Server. Indicates that either a Radius or Tacacs |
| server is used for validation. The location and other parameters of the server must be |
| configured in CONFIG=> SECURITY. See section 4.3 of the CyROS Reference |
| Guide. |
Authentication | Applies when Authentication Type is Local or Server. Either PAP or CHAP or both can |
Protocol | be used for authentication. |
STEP FIVE
The parameters defined in the Routing Protocol and Traffic Control Menus should be set after reading chapters 9 and 12, respectively. It is probably best to complete the basic configuration of all router interfaces, then return to the routing protocol and traffic control menus after general routing and traffic control strategies have been defined.
Chapter 6 - The SWAN and Async Interfaces | 47 |
