Avocent Cyclades-PR2000 Example 2 A LAN-to-LAN Example Using Frame Relay, Central Offices, Kbps

Cyclades-PR2000

Example 2 A LAN-to-LAN Example Using Frame Relay

This section will guide you through a complete router installation for the connection of two LANs via Frame Relay. Figure 4.9 shows the example system used in this section. Spaces have been provided next to the parameters needed for the configuration where you can fill in the parameters for your system. Do this now before continuing.

Central Office's

LAN

Network IP: 100.130.130.0

_ _ _ _ _ _ _ _

Mask: 255.255.255.0

_ _ _ _ _ _ _ _

Network IP: 15.0.0.0

_ _ _ _ _ _ _

Mask :255.255.255.0

_ _ _ _ _ _ _ _

Remote Site’s

LAN

	ETH0 PR2000 200.240.230.2				PR2000
		_ _ _ _ _ _ _ _
100.130.130.1	SWAN	_ _ _ 128 Kbps		16
					200.240.230.1
_ _ _ _ _ _ _ _
		Connection		Public
					_ _ _ _ _ _ _ _
	V.35 DSU/CSU		Frame Relay
				Network
	_ _ _ _ _ _ _ _

Network IP: 200.240.230.0 _ _ _ _ _ _ _ _

Mask :255.255.255.240 _ _ _ _ _ _ _ _

FIGURE 4.9 CENTRAL OFFICE AND REMOTE SITE CONNECTED USING SWAN INTERFACES

Chapter 4 - Step-by-Step Instructions 27