Cyclades-PR2000
|
| Router 2 | |
Unnumbered | Slot 3 | 192.168.100.1 | |
Interfaces | |||
ETH0 | |||
| |||
|
|
Slot 1
Router 1 | 10.0.0.3 | F |
| ||
|
| |
| ETH0 |
|
| E | Network 3 |
B
ANetwork 1
FIGURE 9.2 STATIC ROUTING EXAMPLE 2
Figure 9.2 shows another static routing example to explain the Gateway or Interface parameter. Between the two routers is a point-to-point connection. Another network could be created, but is not necessary. Both routers can be assigned unnumbered interfaces, because everything that leaves one router is sent to the other.
To define static routes, enter the menu CONFIG =>STATIC ROUTES =>IP =>ADD ROUTE. A description of the parameters in this menu, with the configuration for Router 1 in the examples above, is given in the table that follows.
Chapter 9 - Routing Protocols | 66 |
