Inverter/Charger, Minimum Cable Size | Xantrex Technology HW 1000

Table 1-2Recommended Cable Sizes

	Cable Length: Battery		Maximum battery Fuse
Inverter/Charger	to Inverter (one way)	Minimum Cable Size	Size

Freedom HW	Less than 5 feet (1.5	No. 2 AWG	150 Adc
	meters)

Note: Xantrex recommends not using a cable longer than 5 feet (1.5 meters) in each direction. Cable sizes above are based on the US National Electrical Code Table 310.17 - 75C cables, assuming an ambient temperature of 30 °C cables.

	Important: Using the correct cable size is critical to achieving the rated
	performance of the Freedom HW unit. When starting a heavy load the Freedom
	HW can draw current surges from the battery of up to 400A. If the DC wiring is
	too small the voltage drop from this surge will result in a voltage at the Freedom
	HW terminals that is too low for the Freedom HW to operate correctly. The
	Freedom HW may appear to operate correctly with smaller cables until a heavy
	load such as a microwave or refrigerator attempts to start - then the unit may
	work correctly sometimes and not work correctly other times.
DC Disconnects	The DC circuit from the battery to the Freedom HW must be equipped
and Over-	with a disconnect and over-current device. This usually consists of a
Current Devices	circuit breaker, a “fused-disconnect,” or a separate fuse and DC
	disconnect. Do not confuse AC circuit breakers with DC circuit breakers.
	They are not interchangeable. The rating of the fuse or breaker must be
	matched to the size of cables used in accordance with the applicable
	installation codes. The breaker or disconnect and fuse should be located
	as close as possible to the battery, in the positive cable. Applicable codes
	may limit how far the protection can be from the battery.
Batteries	The Freedom HW uses 12-volt battery banks. Every Freedom HW system
	requires a deep-cycle battery or group of batteries that provide the DC
	current that the Freedom HW converts to AC.

1–10	975-0468-01-01

This guide for use by qualified installers only

HW 1000 specifications

Xantrex Technology HW 1000 is a well-regarded power inverter designed to meet the needs of recreational vehicle (RV) enthusiasts, marine applications, and off-grid solar systems. With its robust design and advanced technology, the HW 1000 offers an optimal solution for transforming DC power into reliable AC power, making it an essential component for anyone who requires off-grid energy solutions.

One of the main features of the Xantrex HW 1000 is its ability to deliver a continuous output of 1000 watts with a peak surge capability of up to 2000 watts. This means it can handle high inrush currents needed by appliances like refrigerators and air conditioners, providing a reliable power supply, even during demanding operations. The inverter is equipped with a pure sine wave output, which is crucial for sensitive electronics, ensuring that devices operate smoothly without the risk of damage or interference.

The HW 1000 employs advanced technology to detect and eliminate any harmonic distortion, giving users clean and stable power for any application. The inverter features built-in safety mechanisms such as over-voltage, under-voltage, and thermal overload protection, which safeguard both the unit and the devices connected to it. This robust protection ensures longevity and reliable operation, even in challenging conditions.

Portability is another key characteristic of the Xantrex HW 1000. Compact and lightweight, it can be easily transported in an RV, boat, or even a truck bed. The inverter is designed for easy installation, with a user-friendly interface that includes LED indicators for battery status, output voltage, and fault alerts, allowing users to monitor performance easily.

The HW 1000 is versatile and can be used in various applications, making it ideal for both recreational and emergency situations. It can power tools for construction work in remote locations, support essential appliances during power outages, or even charge batteries in solar setups, showcasing its adaptability across different energy needs.

In summary, the Xantrex Technology HW 1000 is a powerful, efficient, and versatile power inverter packed with essential features that ensure reliable performance for a wide range of applications. Its lightweight design, safety features, and pure sine wave output make it a popular choice among outdoor enthusiasts, tradespeople, and anyone looking for a dependable power solution.

Table 1-2Recommended Cable Sizes

Inverter/Charger

Minimum Cable Size

current that the Freedom HW converts to AC.

975-0468-01-01

HW 1000 specifications