Xantrex Technology HW 1000 manual Mounting the Display Panel, To mount the display panel

Page 39

Basic Installation Procedures

Step 7: Mounting the Display Panel

Xantrex has three communications cables of different lengths available for purchase. Choose a 25-foot cable (p/n: 31-6257-00), 50-foot cable (p/n: 31-6262-00), or a 70-foot cable (p/n: 31-6275-00).

Flush mounting the panel on a wall or bulkhead requires an opening specified in the display panel mounting template. About 1.5 inches (3.8 cm) of free space is required within the wall to accommodate the depth of the panel. Be sure there is no wiring or other obstructions within the wall before you make an opening.

To mount the display panel:

1.Choose a location that is dry, out of direct sunlight, free from corrosive or explosive fumes, and otherwise appropriate for mounting an electronic device.

2.Remove the display panel from Freedom HW.

3.Pilot-drill the corner holes using the display panel mounting template and cut out the hole in which the display panel will be inserted.

4.Position the display panel mounting plate over the hole and fasten it to the wall using all four screws in all the corners of the mounting plate.

5.Route the communications cable(s) inside the wall and through the mounting plate opening.

6.Insert the cable’s connector (the one through the opening) in the jack on the backside of the display panel.

7.Place the display panel through the opening of the mounting plate and secure it with two screws – one for each side.

8.Route the communications cable to the Freedom HW’s display panel compartment and insert the other connector in the jack located near the battery select dip switch.

9.Install the display panel compartment cover over the compartment and secure it with two screws – one for each side.

Important: Do not route the communications cable in parallel and in conduit with the AC and DC wires. In situations where the cable must cross with the AC and DC wires, make sure they cross at a 90° angle to each other.

975-0468-01-01

1–27

This guide for use by qualified installers only

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Freedom HW Page Freedom HW 1000 Inverter/Charger Contact Information Date and RevisionOrganization PurposeScope AudienceRelated Information Conventions UsedImportant Safety Instructions 975-0468-01-01 Personal Precautions When Working With Batteries DC Connection Precaution Contents Electrical Specifications Inverter Mode SpecificationsInstallation 1What’s In The Box Materials ListInstallation Codes Safety InstructionsHigh Level Overview of Installation Steps Installation Tools and MaterialsBasic Installation Procedures To engine Designing the InstallationHW system Carry the current rating of the individual AC output breaker Breaker Size Minimum Wire SizeMinimum Cable Size Inverter/ChargerBasic Installation Procedures Choosing a Location for the Freedom HW To mount the Freedom HW Mounting the Freedom HWApplication Stranded cable is recommended Minimum equipment ground cable sizeGeneral AC Wiring Considerations Connecting the AC Input WiresFreedom HW Color AC Wire5Freedom HW AC Wiring Compartment Make Model Connecting AC Output to an Existing AC CircuitBasic Installation Procedures 975-0468-01-01 6AC Wiring Diagram with an Inverter Subpanel 7AC Wiring Diagram without an Inverter Subpanel 8shows the DC end for your reference Connecting the DC CablesTo make the DC connections Basic Installation Procedures DC Grounding To mount the display panel Mounting the Display PanelTesting in Invert Mode Testing Your InstallationTesting in Shore Power Mode Page Specifications Other Electrical Specifications Inverter ModeDC Input AC OutputElectrical Specifications Charge Mode AC InputDC Output Unit Dimensions and Weight Environmental SpecificationsSystem Specifications Physical SpecificationsInverter Overload Operation Regulatory ApprovalsInvert Power Derating vs. Ambient Temperature 1Charging Voltage Charger Output Current vs. AC Input VoltagePage Page Xantrex Technology Inc
Related manuals
Manual 80 pages 1.39 Kb

HW 1000 specifications

Xantrex Technology HW 1000 is a well-regarded power inverter designed to meet the needs of recreational vehicle (RV) enthusiasts, marine applications, and off-grid solar systems. With its robust design and advanced technology, the HW 1000 offers an optimal solution for transforming DC power into reliable AC power, making it an essential component for anyone who requires off-grid energy solutions.

One of the main features of the Xantrex HW 1000 is its ability to deliver a continuous output of 1000 watts with a peak surge capability of up to 2000 watts. This means it can handle high inrush currents needed by appliances like refrigerators and air conditioners, providing a reliable power supply, even during demanding operations. The inverter is equipped with a pure sine wave output, which is crucial for sensitive electronics, ensuring that devices operate smoothly without the risk of damage or interference.

The HW 1000 employs advanced technology to detect and eliminate any harmonic distortion, giving users clean and stable power for any application. The inverter features built-in safety mechanisms such as over-voltage, under-voltage, and thermal overload protection, which safeguard both the unit and the devices connected to it. This robust protection ensures longevity and reliable operation, even in challenging conditions.

Portability is another key characteristic of the Xantrex HW 1000. Compact and lightweight, it can be easily transported in an RV, boat, or even a truck bed. The inverter is designed for easy installation, with a user-friendly interface that includes LED indicators for battery status, output voltage, and fault alerts, allowing users to monitor performance easily.

The HW 1000 is versatile and can be used in various applications, making it ideal for both recreational and emergency situations. It can power tools for construction work in remote locations, support essential appliances during power outages, or even charge batteries in solar setups, showcasing its adaptability across different energy needs.

In summary, the Xantrex Technology HW 1000 is a powerful, efficient, and versatile power inverter packed with essential features that ensure reliable performance for a wide range of applications. Its lightweight design, safety features, and pure sine wave output make it a popular choice among outdoor enthusiasts, tradespeople, and anyone looking for a dependable power solution.
Top Page Image Contents