5.Store idle equipment. When not in use, helmets must be stored in a dry location to inhibit rust. Always lock up helmets and keep out of reach of children.
6.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective gear is essential to protect against welding rays, some examples are: a leather welding apron, welding sleeves, jeans without cuffs, work boots. Wear restrictive hair covering to contain long hair.
7.Use eye and ear protection.
When welding, wear ANSI- approved impact safety goggles under the Welding
Helmet. Wear a
8.Stay alert. Watch what you are doing, use common sense. Do not weld when you are tired.
9.Check for damaged parts. Before using any helmet, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the helmet if any switch does not operate properly.
10.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts can render helmet ineffective, possibly causing eye damage, and will void the warranty. Only use accessories intended for use with this helmet.
Approved accessories are available from Harbor Freight Tools.
11.Do not weld if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not weld.
12.Maintenance. For your safety, service and maintenance should be performed regularly only by a qualified technician.
13.This helmet provides protection for intended purposes only. There are certain applications for which this helmet was designed. Do not modify this helmet and do not use this helmet for a purpose for which it was not intended.
•The Welding Helmet is not suitable for laser welding or Oxyacetylene Welding/ Cutting processes.
•The Welding Helmet will not protect against severe impact hazards.
•The Welding Helmet will not protect against explosive devices or corrosive liquids.
14.Use only at temperatures within the operating range for your model as stated on the specifications chart in this manual.
Item 67854 | For technical questions, please call | Page 3 |
91214 |
|
|