WARNING
Inhalation Hazard:
Welding and Plasma Cutting Produce
toxic fumes.
Exposure to welding or cutting exhaust fumes can increase the risk of developing certain cancers, such as cancer of the larynx and lung cancer. Also, some diseases that may be linked to exposure to welding or plasma cutting exhaust fumes are:
• Early onset of Parkinson’s Disease
• Heart disease | • Ulcers |
•Damage to the reproductive organs
•Inflammation of the small intestine or
stomach | • Kidney damage |
•Respiratory diseases such as emphysema, bronchitis, or pneumonia
Use natural or forced air ventilation and wear a respirator approved by NIOSH to protect against the fumes produced to reduce the risk of developing the above illnesses.
15.Maintain the helmet and lens correctly to help ensure reliable protection.
•Clean filter’s surfaces regularly.
Keep sensors and solar cells clean using a clean
•Should the
•Regularly replace the Front Lens Cover if it becomes cracked, scratched, pitted, or otherwise damaged.
•Do not make any modifications to either the
Do not use any replacement parts other than those specified in this manual. Unauthorized modifications and replacement parts will void the warranty and expose the user to the risk of personal injury. Do not open or tamper with the
16.Do not place the Welding Helmet’s
17.Severe personal injury and/ or blindness may occur if the user fails to follow the aforementioned warnings and/or fails to follow the operation instructions.
Page 4 | For technical questions, please call | Item 67854 |
|
| 91214 |