Repair
Repair
Air Regulator
Repair Kits are available. Refer to page 6.
Every day, drain contaminants from the bowl before reaching the baffle level by opening the drain (D) at the bottom of the bowl (B). See FIG. 3.
Clean the air filter regularly to maximize filtering effi- ciency and to avoid excessive pressure drop. Fully relieve pressure to remove the bowl (B).
Clean the filter element and bowl using detergent and water or denatured alcohol. Use compressed air to blow out the filter body. Blow the filter element out from the inside.
Service the regulator, if the regulator fails to operate, operates roughly, or vibrates. Inspect all parts for wear or damage. Replace damaged parts. Refer to page 7.
Lubricate the bearing area, all
Lubricator Service (Accessory)
An accessory Lubricator Kit is available. Order Part No. 244841. Repair Kits are available (refer to page 7) for an accessory lubricator.
Clean the lubricator regularly to maximize efficiency. Fully relieve pressure and remove the lubricator from the air line.
Disassemble the lubricator.
Clean the parts with detergent and water or denatured alcohol. Wipe dry with a clean, soft cloth.
Use compressed air to blow dirt and contaminants out of the lubricator body. Inspect all parts for wear or damage. Replace damaged parts.
Clean the sight glass (S) thoroughly. See Fig. 4. Do not leave solvent residue in the sight glass as it may attack or weaken the glass. If the sight glass appears dam- aged, replace it immediately.
Reassemble the lubricator.
3A0293C | 5 |