2--13 Settings

Service — Statistics / Diagnostics
The controller service statistics / dia gnostics can be displayed from the keypad.
Some settings may require a password (if the controller i s set up for one).
¡From any o f the Status displays, press Enter/SaveSettings key to move to
the Settings level of menus.
©¢£¤¥¦ Press right arrow "key six times to move to Service menu.
§Now press Enter/Save Settings keytomovetothefirstService menu.
¨Youcan press the rightarrow "key to see the other Service menus (as shown
below). An overviewexplanation of each setting is listed below.

7 Service Menus (last menu loops back to first)

ATS Statistics

This display shows the total number of transfers, the total number of transfers
dueto source failures, and the total number of days that the ATShas been en-
ergizedsince the controller has been installed. Thesevalues cannot be reset.

Source Statistics

This display shows the total time that the normal and emergency sources have
been acceptable since installation of the controller. These value s cannotbe
reset.

View Service Data

This display is for servicepersonnel only.

Serial Communication

This display allows the user to test the serial communications port of the
controller. To perform the test, the transmit lines of the serial
communications port are connected to the receive lines so that the signals sent
by the controller are also received by the controller. The test is activated by
pressing the Enter/Save Settings key while viewing this display. If the
controller receives the s ame information that it sent, testis passed, otherwis e
it fails.

I/O Status (not shown)

These displays show the status of several of the control ler’s input and output
lines.

CP Software

This display shows the version of the loaded softwa re and the date of its
release.
SETTINGS
VoltageDO PU
Frequency DO PU
¡
©¢£
¤¥¦
ATS STAT ISTIC S
ATSTotal Xfers:
SrcFailTotXfers:
Days Energized:
SOURCE STATISTICS
TimeNAvl: h min
TimeEAvl: h min
VIEW SERVICEDATA
Addr:
Data:
SERIAL
COMMUNICATION
Loop Test:
CP SOFTWARE
Version:
Date:
SERVICE
Statistics
Diagnostics
§
¨
press 6 times