1--2Overview
Settings Overview
The controller settings can be display ed and changed from the keypad.
Some settings may require a password (if the controller i s set up for one).
From the ATS Status display, pre ss Enter/Save Settings ¿keytomovetothe
Settings level of menus.
Press the right arrow key "to see the eight parameter informationheadings (as
shown below). An overview of each setting is listed below. The detailed menus
for each setting are on the following page s.
8 Parameter Menus (loop back to beginning)
SETTINGS
Time Delays
SETTINGS
VoltageDO PU
Frequency DO PU
SETTINGS
Features
SETTINGS
General
SETTINGS
Engine Exerciser
VIEW
Event Log
SERVICE
Statistics
Diagnostics
SERVICE
Factory
SelectableFeatures
Voltage and Frequency Settings seepage2–2
CP settings and Normal & Emergency vol tage and frequency pickup & dropout.
Time Delay Settings seepage2–4
Bypass running time delay, and se ttings for all standard time delays.
Features Settings seepage2–6
Commit on transfer, shed load, phase rotation, and inphase moni tor settings.
General Settings seepage2–8
Reset settings, language, communication, logging, and password.
Engine Exerciser Settings seepage2–10
Present date and time, seven exercise programs eachwith six parameters.
View Event Log seepage2–12
Last 99 events in date and time order;six types and seven reasons are logged.
Service Statistics/Diagn ostics, Factory Selectable Features
For factoryservice use only. see pages 2–13
SETTINGS