2--12Settings

View Event Log
The controller event logging feature can be displayed from the keypad. Some
settings may require a password (if the controller is set up for one).
¡From any o f the Status displays, press Enter/SaveSettings key to move to
the Settings level of menus.
©Press the right arrow "key to move to Setting Time Delays menu.
¢Press the right arrow "key again to move to Settings Features menu.
£Press the right arrow "key again to move to Settings General menu.
¤Press the right arrow "key again to move to Settings Engine Exercise r.
¥Press the right arrow "key again to move to View Event Log.
¦Now press Enter/Save Settings keytomovetotheeventsloggeddisplay.
§Youcan press the right arrow "key to see the other events logged.
An overview explanationof each setting is listed below.

Logged Events

This display shows the last 99 loggedevents. Each event display shows the
event number (1 is the mo st recent, 99 is the oldest), the t ime and date of the
event, the event type, and the event reason (if appli cable).

Event Types

Nine types of events are logged. They are (dis played event & meaning) :
Eng Start The controller has si gnaled the engine to start
Xfer N>E The controller has initiated transfer from normalto emergency
Xfer E>N The controller has initiated transfer from emergencyto normal
Eng Stop Thecontr oller has signaled the engine to stop
EmergAcc Theemer gency source has become acceptable
EmergNAccThe emergency source has become not acceptable
NormAcc The normal source has become acceptable
NormNAcc The normal source has become not acceptabl e
XfrAbort The transfer has been aborted

Event Reasons

Twenty–one reasons for events are logged. They are (displayed reason & meaning):
LoadShed Load shed requested
NormFail Normal source failure NormOF Normal source over frequency
ManualXfr Manual transfer NormPHR Normal source phase rotation
Test5 Testrequested (Feature 5) NormVUNB Normal source voltage unbalance
Test17 Test requested (Feature17) EmergUV Emergencysource under voltage
Comm Serial communications EmergOV Emergency source over voltage
EngExerc Engine Exerciser EmergUF Emergency source under fr equency
EmergFail Emerg source failure EmergOF Emergency source overfrequency
NormUV Normal source under voltage EmergPHR Emergency source phaserotation
NormOV Normal source over voltage EmergVUNB Emergency source voltage unbalance
NormUF Normalsource under frequency Feature6 Feature 6 activated
SETTINGS
VoltageDO PU
Frequency DO PU
¡
1No Event Recorded
2No Event Recorded
VIEW
Event Log
©¢£¤¥
¦
Scroll "
to show the
last 99 logged
events.
§
98
No Event Recorded
99
No Event Recorded