DM500™ and DM550™Digital Mailing System Operating Guide

12Taking the Meter Out of Service

13Adding an Optional Printer

Call your Pitney Bowes representative if you need to return the postage meter (contained in the IntelliLink® Control Center) to Pitney Bowes. When instructed, follow the procedure here.

1.Press the Menu key and select Set Up.

2.Select Take Meter Out of Service.

3.Select Transfer Funds from Meter.

This transfers the funds from your meter back to your account.

4.The system transfers the funds and displays the amount transferred.

5.To print this amount on an envelope, place an envelope on the feed deck and press the Start key. To print on a tape, simply press the Tape key.

You can connect a Pitney Bowes external laser printer to your mailing system. To add this optional external printer, all you need to do is plug the USB connector from the printer into one of the two upper-most USB con- nectors on the back of the mailing system base. Your mailing system rec- ognizes the printer shortly after you plug it into the base.

The dual USB ports are located on the right back corner of the system base as shown here.

Dual External Device USB Ports

SV60890 Rev. G

5-25

Page 89
Image 89
Pitney Bowes DM500, DM550 manual Taking the Meter Out of Service Adding an Optional Printer