DM500™ and DM550™ Digital Mailing System Operating Guide

To change the date

1.If you are printing the date correction on an envelope and if the en- velope is sealed, press the Seal key and select Sealer Off. If you are printing on a tape, go to step 3.

2.Turn the piece of mail around 180 degrees so that the meter stamp is in the lower left corner as shown here. Then, place the envelope on the feed deck with the flap facing down.

00 37

37 00 30 00

3. Press the Mode key and select Key In Postage.

4. Enter the 00.00 for the postage value using the numeric keys and press Enter.

5. Press the Menu key and then select Meter Stamp Options.

6. Select the Date option and make the appropriate selection.

7. Follow the prompts on the main screen. Press Enter when complete.

8. Press the Start key.

If you are printing a tape, press the Tape key.

9. The date correction prints on the envelope as shown here:

00 00

JULY 03,2002

73 00

10.If you print a tape, apply the tape to the envelope below the existing meter stamp.

SV60890 Rev. G

4-27

Page 63
Image 63
Pitney Bowes DM500, DM550 manual To change the date