Pitney Bowes DM550, DM500 manual Connectors on the Back of the IntelliLink Control Center

Models: DM500 DM550

1 200
Download 200 pages 54.21 Kb
Page 26
Image 26
Connectors on the Back of the IntelliLink® Control Center

2 • Meet the DM500™ and DM550™ Digital Mailing System

Mailing System Exterior

continued

Connectors on the Back of the IntelliLink® Control Center

Internal Analog Phone Line Connector - Depending on the version of your IntelliLink® Control Center, you may have an internal analog mo- dem. The Internal Analog Phone Line Connector label in the figure below identifies the PCN numbers of the IntelliLink® Control Centers that have an internal analog modem and can connect directly to an analog phone line. The PCN number is located on the bottom of your IntelliLink® Control Center.

The term analog phone line refers to a RJ11C or RJ11W compatible (single line) telephone wall plug typically used for a residential phone or facsimile hookup.

External (Modem) USB Connector - The IntelliLink® Control Center has a connector for a USB device. If the PCN number of your IntelliLink® Control center is one of the ones listed under USB Connector label in the figure below, you must connect an external modem to this USB connector to dial into Pitney Bowes to perform feature updates or add postage. The PCN number is located on the bottom of your IntelliLink® Control Center.

IntelliLink® Control Center AC Adapter Receptacle - The receptacle for the AC adapter is located on the back of the IntelliLink® Control Center.

If you need to remove the control center from the mailing system base and move it to an analog telephone line, you plug the AC adapter into this receptacle. When the control center is connected to the mailing system base, access to the AC adapter is blocked as indicated by the dotted line in the picture below.

Internal Analog Phone Line

Connector

Use this to connect directly to an analog phone line

if the PCN on the bottom of the

IntelliLink® Control Center has the number: 1DXX

IntelliLink® Control Center

installed on a DM SeriesSystem base. Dotted line indicates AC Adapter Receptacle is covered by base

USB Connector

Use this to connect an external modem if the PCN on the bottom of the

IntelliLink® Control Center has the number: 1CXX

2-8

SV60890 Rev. G

Page 26
Image 26
Pitney Bowes DM550, DM500 manual Connectors on the Back of the IntelliLink Control Center, Mailing System Exterior