Pitney Bowes DM500, DM550 manual Seal Only, To select a Print Permit, Mode Selection

Models: DM500 DM550

1 200
Download 200 pages 54.21 Kb
Page 49
Image 49
Seal Only

DM500™ and DM550™ Digital Mailing System Operating Guide

Mode Selection:

Seal Only

To select a Print Permit:

1.From the IntelliLink® Control Center, press the Mode key.

2.Select Print Permit. The “Print Permit Selection” screen appears.

3.Select the permit you want and press Enter.

4.Place the mail on the feed deck.

5.Press the Start key.

Use this mode if you just want to seal the envelopes and do not want to apply postage.

1.Press the Mode key.

2.Select Seal Menu - No Printing and select the appropriate option.

3.Select the Reset Counter option if you want to clear the number of pieces of mail fed into the machine in the seal only mode.

4.Place the mail on the feed deck.

5.Press the Start key.

NOTE: For additional sealing options, press the Seal key on the IntelliLink Control Center. This allows you to select the following options:

Sealer on (seal envelopes)

Sealer off

Seal only, don’t print

SV60890 Rev. G

4-13

Page 49
Image 49
Pitney Bowes manual Seal Only, To select a Print Permit, DM500 and DM550 Digital Mailing System Operating Guide