4 • Running Mail
8Adding Postage or Changing the Date
If you do not have the correct postage or date on a piece of mail, you can add more postage or change the date directly on a piece of mail. If you prefer, you can print the corrections on at a tape instead and then apply it to the piece of mail.
To add more postage
1.If you are printing more postage on an envelope and if the envelope is sealed, press the Seal key and select Sealer Off. If you are printing on a tape, go to step 3.
2.Turn the piece of mail around 180 degrees so that the meter stamp is in the lower left corner as shown here. Then, place the envelope on the feed deck with the flap facing down.
00 30
30 00 30 00
3. To add more postage, press the Mode key and select Key In Postage.
4. Enter the additional amount using the numeric keys and press Enter.
Press the Start key.
If you are printing a tape, press the Tape key.
5. The additional postage prints on the envelope as shown here.
00 07
03 00
6.If you print a tape, apply the tape to the envelope below the existing meter stamp.
SV60890 Rev. G |
