DM500™ and DM550™ Digital Mailing System Operating Guide
Connecting Your Postage Meter to an Analog Phone Line
continued
Connecting Your Mailing System - Remote Analog Phone Line
If you need to connect to an analog phone line that is not located near your mailing system, you can remove the IntelliLink® Control Center and move it to a location near the analog phone line. At the remote location, plug one end of the AC Adapter (P/N 1C85005) into the back of the control center and the other end into an AC outlet.
To remove the control center and move it to another location:
1.Turn off the power to the mailing system.
2.Pull the blue lever at the right of the control center towards you.
3.Slide the control center for- ward to remove it.
4.Take the control center (and external modem) to where the analog phone line is.
5.Depending on the PCN number of your IntelliLink® Control Center, connect the telephone cord (AWG 26) from either the external modem, or the internal analog connector to the analog telephone line.
Connect the A/C Adapter (P/N 1C85005) to the back of the control cen- ter and plug it into an AC outlet. Refer to the figure below.
AC Adapter plugged into IntelliLink® Control Center
Internal analog line for
PCN 1DXX only
|
| External USB | |
Telephone Cord for |
| Modem Cable | |
| for PCN 1CXX | ||
Analog Line |
| ||
| only | ||
(26 AWG) | External Modem | ||
|
SV60890 Rev. G |
