DM500™ and DM550™ Digital Mailing System Operating Guide
Parts of the Mailing System
Mailing System Exterior
This section describes the parts of your DM500™ and DM550™ System and includes:
•The Mailing System Exterior
•The Mailing System Interior
•The IntelliLink® Control Center
•The Main Screen
IntelliLink® Control Center - This contains the screen and keypad for communicating with the mailing machine and the
Feed and Main Covers - Protect moving parts and prevent foreign objects from entering the machine. The feed cover protects the feeder and the main cover protects the transport area.
Thickness Adjustment Knob - You use this knob to adjust for the thick- nesses of the envelopes you are feeding into your mailing system.
Platform Scale - You can acquire a 5 or 10 lb. integrated platform scale for your DM500™ or DM550™ System.
On/Off switch - Turns the mailing system on and off. This is located on the lower left side of the feed deck.
Feed Deck - This is where you load the mail.
Side Guide - Set this to reduce the skewing of pieces of mail as you feed them into the feeder.
Transport Release Knob - You pull this knob out to drop the lower half of the transport deck if you need to clear a jam.
Art Card Slot - The art card plugs into the art card slot on the right side of the IntelliLink® Control Center (as shown in the photo on the right). The art card con- tains advertisements and inscriptions.
Quick Reference Card Set - These are easy reference cards containing instructions for performing operations like how to set postage, process mail, or clear jams. The cards are located in a slot in the stacker module of your mailing system.
Stacker - This is where mail is deposited after the postage is applied to the piece of mail. It is located on the right side of the machine.
SV60890 Rev. G |
