6 • Adding Postage
1Connecting Your Postage Meter to an Analog Phone Line
Connecting Your Postage Meter - Local Analog Phone Line
Which connector do I use?
Internal Analog Phone Line Connector - Depending on the version of your IntelliLink® Control Center, you may have an internal analog modem. The Internal Analog Phone Line Connector label in the figure below iden- tifies the PCN numbers of the IntelliLink® Control Centers that have an internal analog modem and can connect directly to an analog phone line. The PCN number is located on the bottom of your control center.
External (Modem) USB Connector - The IntelliLink® Control Center has a connector for a USB device. If the PCN number of your IntelliLink® Control Center is one of the ones listed under USB Connector label in the figure below, you must connect an external modem to this USB connector to dial into Pitney Bowes to perform feature updates or add postage. The PCN number is located on the bottom of your control center.
If your mailing system is not located near an analog phone line and you need to remove the control center when you perform feature updates or add postage, refer to Connecting Your Postage Meter - Remote Analog Line in this section.
Internal Analog Phone Line
Connector
Use this to connect directly to an analog phone line if the PCN on the bottom of the control center has the number: 1DXX
IntelliLink® Control Center installed on a DM500™ or DM550™ Digital Mailing System base. Dotted line indicates AC Adapter Receptacle is covered by base
USB Connector
Use this to connect an ex- ternal modem if the PCN on the bottom of the control center has the number: 1CXX
SV60890 Rev. G |