DM500™ and DM550™Digital Mailing System Operating Guide
Setting the
Default Scan
Type
If you are using an accounting system on your DM500™ or DM550™ Sys- tem you can set up the scanner so that it interprets the barcode as an ac- count name or account code. Your selection of Account Name or Account Code depends on your accounting system. You can then scan the account code or name directly from the Main screen on IntelliLink® Control Center display.
To set the default value:
1.Press the Menu key on the control center, then select Set Up.
2.Press the down arrow key and then select Barcode Scanner.
3.At the "Barcode Scanner Setup" menu, select Default Scan Type.
4.Select the appropriate option according to the table here:
If your accounting | And the barcode | Select: |
system is: | contains: |
|
Business Manager | Account Name | Account Name |
Business Manager | Account Code | Account Code |
Budget Manager | Account Name | Account Name |
Budget Manager | Speed Code | Speed Code |
AccuTrac™ Mail | Account ID | Account ID |
Accounting Software or |
|
|
MeterNet* |
|
|
* For future release. |
|
|
5.If you do not want any default account system, or preset, select None.
6.As soon as you make your selection, the "Barcode Scanner Setup" menu reappears. You can make other selections or press the left arrow key to return to the "Set Up" menu.
SV60890 Rev. G |
