Graco 262893 important safety instructions XM PFP Mix Manifold

Page 1

Instructions - Parts

XM PFP Mix Manifold

3A2988B

EN

Dual flush, center inject manifold with heated water circulating base for mixing intumescent epoxies with the XM PFP system. For professional use only.

Part No. 262893

6000 psi (41 MPa, 414 bar) Maximum Working Pressure for A and B materials 4500 psi (31 MPa, 310 bar) Maximum Working Pressure for flushing fluid 100 psi (0.7 MPa, 7 bar) Maximum Working Pressure for heating fluid 180°F (82°C) Maximum Fluid Temperature

Important Safety Instructions

Read all warnings and instructions in this manual and XM PFP Operation manual. Save all instruc- tions.

ti20088a

II 2 G c T5

Page 1 Page 2
Image 1
Page 1 Page 2
Contents XM PFP Mix Manifold Related Manuals ContentsSkin Injection Hazard Equipment Misuse Hazard Changing Materials Keep Components a and B SeparateT2* U Component IdentificationTop View OverviewInstallation Grounding Flush Before Using EquipmentOperation Pressure Relief ProcedureFlush Dispensing and Spraying Lead/Lag Imbalance Volume Balancing the Mix ManifoldReference Formula Clean Static Mixers MaintenanceClean Mix Manifold Outlet Clean Mix Manifold Outlet, TroubleshootingCheck Valves RepairMix Manifold PartsMix Manifold Parts Technical Data Graco Information Graco Standard Warranty
Top Page Image Contents