Deflection
Distance
2.Press on the center of the longest span on each belt with moderate finger pressure
1/4” to 1/2”.
Engine Mounting Bolts
3.If the belts deflect too much, tighten belts by loosening the en- gine mounting bolts and moving the engine away from the other pulley slightly. Secure engine mounting bolts and retest tension. If either belt is too long to be properly tensioned, both belts must be replaced.
4.If the belts deflect too little, loosen belts by loosening the engine mount- ing bolts and moving the engine towards the other pulley very slightly. Secure engine mounting bolts and retest tension.
5.Align pump and engine pulleys using a straight edge to reduce noise and vibration.
6.Before use, replace belt cover.
SKU 65204/ 99918
For technical questions, please call | Page 13 |