Basic Specifications
Equipment | Type | Compressor Oil | |
Lubricant | Capacity | 1.37 Quarts | |
|
|
| |
| 65204 | 13 HP, EPA/CARB | |
Engine | Compliant | ||
| |||
| 99918 | 13 HP, EPA Compliant | |
Rotation viewed from PTO | Counterclockwise | ||
(power takeoff - the output shaft) |
| ||
|
| Ø 1” x | |
Engine Shaft | 1/4” Keyway | ||
|
| ||
Air Pressure Range | |||
Air Outlet |
| 3/4" NPT | |
Air Flow |
| 19.5 CFM @ 40 PSI | |
| 18.7 CFM @ 100 PSI | ||
|
| ||
Engine Idle Speed | 1,800±100 RPM | ||
(Pressure switch controlled) | |||
|
| ||
Note: Engine specifications are found in the engine manual supplied with this equipment.
Components and
Controls
Belt Guard | Air |
| Filter |
|
| Oil | |
|
| Sight | |
|
| Glass | |
| Pilot |
| |
| Valve |
| |
Ball | Safety | Tank Pressure | |
Valve | Gauge | ||
Valve | |||
|
|
Tank Drain | Air Storage Tank |
| |
| Fig. 1 |
1.Belt Guard. The Belt Guard (A1) encloses the pulleys and drive belts. It protects the user from the mov-
ing parts and allows the large pulley to direct cooling air to the Air Pump (A2).
2.Oil Sight Glass. The oil sight glass shows proper level of the oil. Oil level should be at center of Sight Glass.
3.Tank Drain Valve. The Air Tank (A18) drain valve allows moisture to be removed from the tank to reduce the chance of corrosion inside the tank.
4.Safety Valve. This Safety Valve (A15) automatically releases air if the Air Tank (A18) pressure exceeds the preset maximum.
a.In an emergency, the ring could be pulled to reduce tank air pressure.
5.Ball Valve. Air hose attaches to this valve. Air pressure required by tools is set by an air pressure regulator.
Regulator and Gauge (Not Included). Outlet air can be regulated by adjust- ing the regulator knob. Clockwise will raise outlet pressure and counter- clockwise will lower outlet pressure. Outlet pressure will be displayed on the regulator’s pressure gauge.
6.Air Storage Tank. The Air Tank (A18) is where air pressurized by the Air Pump (A2) is stored for later use.
7.Tank Pressure Gauge. The Air Tank Pressure Gauge (A20) displays the air pressure in the tank.
SKU 65204/ 99918
For technical questions, please call | Page 8 |