Vacuum Generator

Item	Part No.	Description	Item	Part No.	Description
1	600340237	Pan Phillips Head Screw, #4 x 3/8", SS	19	600342789	1 ½" NPT Close Nipple
2	600343027	Flat Washer, .312" OD x .030 Thick, SS	20	600342467	¼-20 x ¾" Hex Head Screw, SS
3	600342804	Motor/Switch Cover	21	600346795	Flat Washer, .625" OD x .281" ID x .050
4	600341506	Pump Top Closure	22	385310635	Inlet Elbow Kit (includes item 23)
5	600344087	Flat Washer, #10 x 5/8" OD, SS	23	600342932	1 ½" Uniseal®
6	600342332	HexWasherHeadScrew, #10-32x½",SS	24	385310542	Vacuum Generator Tank
7	600341503	Hex WasherHead Screw, #10-12 x7/8",SS	25	600347800	Valve Nipple
8	385310151	O-Ring Kit	26	600347801	Valve Adapter
9	600340664	Bushing	27	600341504	Pump Body
10	600343006	Shoulder Screw, ½ x .687 x 3/8-16	28	385230980	Bellows Assembly (includes item 9)
11	600347807	Bellows Clamp	29	600344470	Pump Eccentric
12	600342783	3-3/4" Diameter Worm Gear Clamp	30	600347788	¼-28 x 5/16" Set Screw, ½ Dog Point
13	600342779	O-Ring, 3" ID x 3 ¼" OD	31	385310245	12 VDC Motor Kit
14	385310539	Diptube Assembly Kit (includes item 13)	31A	385310246	24 VDC Motor Kit
15	600342782	2 ½" Diameter Worm Gear Clamp	32	600342798	Mounting Spindle
16	600342778	O-Ring, 2" ID x 2-1/4" OD	NS	385310774	Kit, VG Pump Assembly, 12VDC
17	385310540	Vacuum Switch Kit (includes items 15, 16)	NS	385310775	Kit, VG Pump Assembly, 24VDC
18	600347802	Duckbill Valve

NOTE: When reassembling pump, tighten screw (Item No. 7) , to 20 ±2 lbs., or until snug. Overtightening will cause holes to strip.

VACUUM GENERATOR