To Attach The Hand Wheels:
1.Line up the Key (67) on the Shaft (69) with the keyway slot in the Hand Wheel (28), and slide the Hand Wheel onto the Shaft. (See Figure J.)
2.Tighten the Set Screw (29) on the Hand Wheel’s hub to hold the Hand Wheel securely in place. (See Figure J.)
3.Install the Hand Wheel Lock (27) into the Hand Wheel (28) by inserting the Hand Wheel Lock into the center hole in the Hand Wheel and threading in a clockwise direction. (See Figure J.)
4.Install the Handle (26) into the Hand Wheel (28) by inserting the Handle into the hole at the edge of the Hand Wheel and threading in a clockwise direction.
(See Figure J.)
5.Repeat Steps #1, #2, #3, and #4 above for the remaining Hand Wheel (61), Shaft (21), Hand Wheel Lock (64), and Handle (63). (See Figure J.)
HAND WHEEL
(28)
HAND WHEEL LOCK
(27)
SHAFT (69)
To Install The Saw Blade:
HANDLE
(26)
FIGURE J
1. CAUTION! To avoid accidental cuts, make sure to wear heavy duty work gloves when installing the Saw Blade.
2.Use the accessory Spanner (110) to loosen (turning clockwise) the Left- Threaded Nut (109) on the Spindle (105). (See Figure K, next page.)
3.Remove the
(See Figure K.)
SKU 93380 | For technical questions, please call | Page 16 |