Harbor Freight Tools 93380 operating instructions Figure K, To Install The Table Insert

Page 17

4.Install the Saw Blade onto the Spindle (105). Make sure the blade teeth point toward you as you stand at the front of the Table Saw. (See Figure K.)

5.Slide on the Outer Flange (108), and thread (counterclockwise) the Left- Threaded Nut (109) back onto the Spindle (105). (See Figure K.)

6.Use the Spanner (110) provided to firmly tighten the Left-Threaded Nut (109). NOTE: Wedge a block of scrap wood in the teeth of the Saw Blade to keep it from turning when tightening the Left-Threaded Nut. (See Figure K.)

SCRAP WOOD

OUTER FLANGE

 

 

 

 

 

 

 

(108)

 

 

 

 

 

FIGURE K

 

 

 

 

 

 

 

 

 

 

 

SAW BLADE

 

SPANNER

 

(NOT INCLUDED)

 

(110)

 

 

 

 

 

 

 

 

SPINDLE

LEFT-THREADED NUT

(105)

(109)

To Install The Table Insert:

1.Select either the Standard Table Insert (116A) or the Dado Table Insert (116B) to be installed. (See Figure L, next page.)

2.Set the selected Table Insert (116A or 116B) into the opening in the Main Table (115). (See Figure L.)

3.Use a 6mm Hex Wrench (not included) to raise or lower each of the four Set Screws (117A, 117B) until the Table Insert (116A or 116B) is flush with the Main Table (115) top. Use a straight edge to make sure the Table Insert is flush with top of the Main Table. (See Figure L.)

4.Check to make sure the Saw Blade will not come into contact with the Table

o

Insert (116A or 116B). Position the Saw Blade at 90. Then, raise and lower the Saw Blade through its full range of motion. Also, rotate the Saw Blade, making sure the Blade never contacts any part of the Table Insert. Repeat this proce- dure with the Saw Blade in the 45o position.

SKU 93380

For technical questions, please call 1-800-444-3353.

Page 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents For technical questions, please call Table SAWGeneral Safety Rules Product SpecificationsSave this Manual Work AreaPersonal Safety Electrical SafetyTool USE and Care Service Specific Safety RulesNever attempt to cut more than one workpiece at a time Industrial applications must follow Osha guidelinesSKU For technical questions, please call SKU For technical questions, please call Grounded Tools Tools with Three Prong Plugs GroundingSee Figure a Extension CordsSee Figure B, next See Figure BFigure B SymbologyPallet Disassembly Table SAW FeaturesUnpacking SET-UP InstructionsSee Figures D and E Motor Brace DisassemblyClean Up Selecting a Proper Location For The Table Saw Assembly InstructionsTo Install The Left And Right Wings To Attach The Front And Rear Fence Rails To Install The Clean Out Door And Dust HoodTo Attach The Hand Wheels To Install The Saw BladeSee Figure J See Figure K SKU For technical questions, please callFigure K To Install The Table InsertFigure L To Install The Blade Guard AssemblySee Figure O, next SKU For technical questions, please call To Attach The Power Switch AssemblySee Figure N See Figure Q AdjustmentsTo Adjust The Splitter And Blade Guard Assembly Figure R See Figure RFigure T To Adjust The 45 Degree And 90 Degree Positive StopsFigure U To Adjust The Saw Blade ParallelismSee Figure Basic Operation For Using The Rip Fence AssemblyOperating Instructions RIP Fence Assy Figure Y Basic Operation For Using The Miter Gauge AssemblySee FigureY INSPECTION, MAINTENANCE, and CleaningSee Figure Z, next Figure Z Please Read the Following CarefullyTroubleshooting Part Description Qty Parts ListAssembly Diagram Description Parts List and Assembly Diagram17B Power Switch Schematic

93380 specifications

Harbor Freight Tools is well-known for offering a wide range of high-quality tools at affordable prices, catering to both DIY enthusiasts and professionals alike. One product that stands out in their extensive catalog is the Harbor Freight Tools 93380, a versatile and reliable air compressor that has garnered attention for its performance and features.

The Harbor Freight Tools 93380 is a portable air compressor designed to meet the demands of various projects, whether in a home workshop or on the job site. With a powerful 1.5 horsepower motor, this unit delivers a maximum pressure of 125 PSI, making it suitable for inflating tires, powering air tools, and other pneumatic applications. Its convenient size ensures it can be transported easily, while still providing the necessary power to handle heavy-duty tasks.

One of the standout features of the 93380 is its 3-gallon tank. This tank size strikes a balance between portability and the volume of compressed air available for use. The compressor operates at a relatively quiet level, which is a great advantage for users who need to work in residential areas or enclosed spaces where noise could be an issue.

The technology behind the Harbor Freight Tools 93380 incorporates an oil-lubricated pump, which enhances its durability and performance. This design helps to extend the lifespan of the compressor while reducing wear and tear, ensuring that users can rely on it for their projects over the long term. Additionally, the compressor is equipped with a quick-connect fitting, allowing for easy attachment of air hoses and tools, thus simplifying the setup process.

Safety features also play a critical role in the design of the 93380. It includes a pressure relief valve to prevent over-pressurization, a necessary component for maintaining safe operation. Furthermore, the unit is equipped with a sturdy handle and rubber feet, ensuring stability during use and transport.

In summary, the Harbor Freight Tools 93380 air compressor offers a compelling combination of portability, power, and reliability. With its efficient motor, convenient tank size, and user-friendly features, it is an ideal choice for both casual users and professionals looking for an affordable yet effective air compressor solution. Whether tackling automotive projects, enhancing woodworking tasks, or performing various household repairs, the 93380 stands out as a noteworthy tool in the air compressor market.
Top Page Image Contents