Harbor Freight Tools 93380 See Figure N, To Attach The Power Switch Assembly

Page 19

4.Temporarily remove the Table Insert (116A, 116B). (See Figure N.)

5.Insert the front tab of the Splitter (315) through the table insert opening in the Main Table (115). Loosen the Hex Cap Screw in the insert opening in the Main Table. Insert the front tab of the Splitter between the Flat Washer and Bracket in the table insert opening. Finger tighten the Hex Cap Screw only at this time.

(See Figure N.)

SPLITTER (315)

TABLE INSERT (116A, 116B)

FIGURE N

6.Attach the rear tab of the Splitter (315) to the L-Bracket (122), using one Bolt (123), one Flat Washer (124), one Elastic Washer (125), and one Nut (126). Finger tighten only at this time. (See Figure M.)

7.Reinstall the Table Insert (116A, 116B). (See Figure N.)

8.Check to make sure the Saw Blade will not come into contact with any part of the Blade Guard Assembly. Position the Saw Blade at 90 degrees. Then, raise and lower the Saw Blade through its full range of motion. Also, rotate the Saw Blade, making sure the Blade never contacts any part of the Blade Guard Assembly. Repeat this procedure with the Saw Blade in the 45 degree position.

9.Once the Blade Guard Assembly is properly adjusted, tighten all remaining loose Bolts on the Assembly.

To Attach The Power Switch Assembly:

1.Attach the Power Switch Assembly (137) to the left end of the Front Rail (23B), using two Screws (135).

(See Figure O, next page.)

SKU 93380

For technical questions, please call 1-800-444-3353.

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents For technical questions, please call Table SAWWork Area Product SpecificationsGeneral Safety Rules Save this ManualPersonal Safety Electrical SafetyTool USE and Care Service Specific Safety RulesNever attempt to cut more than one workpiece at a time Industrial applications must follow Osha guidelinesSKU For technical questions, please call SKU For technical questions, please call Grounded Tools Tools with Three Prong Plugs GroundingSee Figure B Extension CordsSee Figure a See Figure B, nextFigure B SymbologySET-UP Instructions Table SAW FeaturesPallet Disassembly UnpackingClean Up Motor Brace DisassemblySee Figures D and E To Install The Left And Right Wings Assembly InstructionsSelecting a Proper Location For The Table Saw To Attach The Front And Rear Fence Rails To Install The Clean Out Door And Dust HoodSee Figure K SKU For technical questions, please call To Install The Saw BladeTo Attach The Hand Wheels See Figure JFigure K To Install The Table InsertFigure L To Install The Blade Guard AssemblySee Figure N To Attach The Power Switch AssemblySee Figure O, next SKU For technical questions, please call To Adjust The Splitter And Blade Guard Assembly AdjustmentsSee Figure Q Figure R See Figure RFigure T To Adjust The 45 Degree And 90 Degree Positive StopsFigure U To Adjust The Saw Blade ParallelismOperating Instructions Basic Operation For Using The Rip Fence AssemblySee Figure RIP Fence Assy Figure Y Basic Operation For Using The Miter Gauge AssemblySee FigureY INSPECTION, MAINTENANCE, and CleaningSee Figure Z, next Figure Z Please Read the Following CarefullyTroubleshooting Part Description Qty Parts ListAssembly Diagram Description Parts List and Assembly Diagram17B Power Switch Schematic

93380 specifications

Harbor Freight Tools is well-known for offering a wide range of high-quality tools at affordable prices, catering to both DIY enthusiasts and professionals alike. One product that stands out in their extensive catalog is the Harbor Freight Tools 93380, a versatile and reliable air compressor that has garnered attention for its performance and features.

The Harbor Freight Tools 93380 is a portable air compressor designed to meet the demands of various projects, whether in a home workshop or on the job site. With a powerful 1.5 horsepower motor, this unit delivers a maximum pressure of 125 PSI, making it suitable for inflating tires, powering air tools, and other pneumatic applications. Its convenient size ensures it can be transported easily, while still providing the necessary power to handle heavy-duty tasks.

One of the standout features of the 93380 is its 3-gallon tank. This tank size strikes a balance between portability and the volume of compressed air available for use. The compressor operates at a relatively quiet level, which is a great advantage for users who need to work in residential areas or enclosed spaces where noise could be an issue.

The technology behind the Harbor Freight Tools 93380 incorporates an oil-lubricated pump, which enhances its durability and performance. This design helps to extend the lifespan of the compressor while reducing wear and tear, ensuring that users can rely on it for their projects over the long term. Additionally, the compressor is equipped with a quick-connect fitting, allowing for easy attachment of air hoses and tools, thus simplifying the setup process.

Safety features also play a critical role in the design of the 93380. It includes a pressure relief valve to prevent over-pressurization, a necessary component for maintaining safe operation. Furthermore, the unit is equipped with a sturdy handle and rubber feet, ensuring stability during use and transport.

In summary, the Harbor Freight Tools 93380 air compressor offers a compelling combination of portability, power, and reliability. With its efficient motor, convenient tank size, and user-friendly features, it is an ideal choice for both casual users and professionals looking for an affordable yet effective air compressor solution. Whether tackling automotive projects, enhancing woodworking tasks, or performing various household repairs, the 93380 stands out as a noteworthy tool in the air compressor market.
Top Page Image Contents