Dometic 3000 Series owner manual Wiring Diagram, Toilet Operation Corrective Procedures cont’d

Page 12

TOILET OPERATION CORRECTIVE PROCEDURES (cont’d)

Symptom: Water will not enter the bowl when the Flush Handle is raised to add water.

•Place the Water Level Switch in "Low" position and flush toilet. Check status light LED 7 (Add Water) while lifting up the Flush Handle.

If LED 7 comes on, replace the Control Module.

If LED 7 remains off, the Flush Switch or its related wiring is defective.

Symptom: Water Level Switch has no effect on water level in "Low" or "High" position.

•Replace the Control Module.

Symptom: Flush Ball will not open when Mode Switch is in the "Service" position.

•Replace the Control Module.

Image 12

Contents Magnum Opus Dometic Corporation Sanitation SystemsTable of Contents Toilet Model IdentificationOrdering Parts Under the seat, and is easily read when the seat is raised Important Information Before OperationToilet Controls Flush and Forget OperationService Operating InstructionsNormal Manual OverrideAutomatic Flush Operation Timing Chart Proper Cleaning and MaintenanceMagnum Opus Flush and Forget Cycle Time Magnum Opus Add Water Time LimitsDeodorants and Special Tissue WinterizingSpare Parts Description Part Number QuantityBase Assembly Components Flush Mechanism ComponentsFlush Handle Components ControlTroubleshooting Problem Possible Cause Service InstructionsTroubleshooting cont’d Manual Flush OperationElectrical Troubleshooting Error CodesStatus Light Color Function Status Light No. of Flashes Pause ConditionElectrical Troubleshooting cont’d Symptom Flush Ball will not closeWiring Diagram Toilet Operation Corrective Procedures cont’dCustomer Service Master Sanitation DistributorsPage Page MANUFACTURER’S THREE-YEAR and TEN-YEAR Limited Warranties ExclusionsImplied Warranties Other Rights