IMPORTANT INFORMATION BEFORE OPERATION
1. | Fill freshwater tank and add deodorant to holding tank through toilet bowl. |
|
2. | Make sure all guests understand the operation of the toilet system and the |
|
® | ||
| ||
| flushing instruction label is easy for guests to read. This label is located |
|
| under the seat, and is easily read when the seat is raised. |
|
3.Shut off the toilet system before servicing and do not leave the vehicle with toilet system circuit breaker on.
4.Never use drain openers, alcohol, solvents, etc. in the toilet.
5.If the toilet does not function properly, refer to the Troubleshooting
section of this manual and repair as necessary. If problem persists, contact your local SeaLand product dealer or see the Customer Service section of this manual.
FLUSH and FORGET® OPERATION
1.To add water to the toilet before using (if necessary), raise flush handle until desired water level is reached. (Water flow will stop automatically after a pre- programmed period of time).
2.To flush toilet, press flush handle down. Water will flow into bowl for two seconds, then flush ball will open. Toilet will not flush again until water refill cycle is complete.
3.Do not dispose of sanitary napkins or other
TOILET CONTROLS
ACCESS COVER
ADD WATER
TO BOWL
OFF
CONTROL SWITCHES
FLUSH HANDLE
OFF
FLUSH | Figure 1 |
3