Harbor Freight Tools 93762 operating instructions Adjusting The Blade Guide Bearings, Figure S

Page 19

Adjusting The Blade Guide Bearings:

1.NOTE: Blade Guide Bearings (88, 92, 100, 104) adjustment is a critical factor in the performance of the Bandsaw.

2.It is always best to try a new Saw Blade (82) to see if it will correct poor cutting before attempting to adjust the Blade Guide Bearings. For example, if a Saw Blade becomes dull on one side sooner than the other, it will begin cutting crooked. A Saw Blade replacement will correct this problem, whereas Blade Guide Bearings adjustment will not.

3.If a new Saw Blade does not correct the problem, check the Blade Adjustable Seats (83, 110) to obtain the proper clearance. (See Figure S.)

4.NOTE: There should be from .000” (just touching) to .001” clearance between the Saw Blade and Blade Guide Bearings (88, 92, 100, 104). To obtain this clearance adjust as follows:

A.The Outer Blade Guide Bearings (92, 104) are mounted to Shafts (91, 103) and can be adjusted. (See Figure S.)

B.Loosen the Nuts (86, 96) while holding the Shafts (91, 103) with an Allen wrench (not included). (See Figure S.)

C.Position the Shafts (91, 103) by turning it to the desired position of clear- ance. Then, re-tighten the Nuts (86, 96). (See Figure S.)

D.Adjust the Inner Blade Guide Bearings (88, 100) in the same manner.

OUTER BLADE GUIDE BEARING

 

 

 

 

 

SAW BLADE (82)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(92, 104)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NUT (86, 96)

SHAFT (91, 103)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(NOT SHOWN)

 

 

 

 

 

 

 

 

 

 

 

INNER BLADE GUIDE BEARING (88, 100)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SHAFT (91, 103)

 

 

 

 

 

 

 

 

 

 

 

 

FIGURE S

SKU 93762

For technical questions, please call 1-800-444-3353.

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents For technical questions, please call HORIZONTAL/VERTICAL Metal Cutting BandsawWork Area Product SpecificationsGeneral Safety Rules Save this ManualPersonal Safety Electrical SafetyTool USE and Care Service Specific Safety RulesNever attempt to cut more than one workpiece at a time Page Grounded Tools Tools with Three Prong Plugs GroundingThis Product Uses a Prong Plug Double Insulated Tools Tools with TWO Prong Plugs Extension CordsSee Figures C and D, next Recommended Minimum Wire Gauge for Extension Cords SymbologyVolt To Assemble The Stand Assembly InstructionsPages, refer to the Assembly Diagram on UnpackingTo Attach The Bandsaw To The Stand To Attach The Stock Stop AssemblyTo Attach The Wheels To The Stand See Figure E, previousTo Attach The Spindle Pulley And Motor Pulley To Attach The Pulley CoverSee Figure I, next To Adjust The Cutting Speed To Install The V-BeltSee Figures I and J Spindle Pulley Motor Pulley Figure KFigure M To Convert The Bandsaw For Vertical UseTo Use The Vise Operating InstructionsTo Adjust The Stock Stop To Use The Quick Vise Adjustment For An Angle CutFigure S Adjusting The Blade Guide BearingsAdjusting The Blade Tension Adjusting The Blade TrackingSee Figure S Figure T Adjusting The Feed RateBasic Bandsaw Operation -- Vertical Position Adjusting The Blade Guide BracketsFigure W See Figure WBasic Bandsaw Operation -- Horizontal Position See Figure INSPECTION, MAINTENANCE, and CleaningFigure Y See Figure Z See Figure JFigure AA Figure BB Please Read the Following CarefullyTroubleshooting Description Parts ListDescription Assembly Diagram
Related manuals
Manual 29 pages 58.01 Kb

93762 specifications

Harbor Freight Tools is renowned for offering a range of high-quality tools at affordable prices, and the 93762 model is no exception. This product is an essential addition to both professional and DIY enthusiasts' toolkits, designed to enhance efficiency and performance.

One of the main features of the Harbor Freight Tools 93762 is its powerful motor. With a robust design, this tool is engineered to deliver optimal performance for a variety of tasks, ensuring that users can tackle even the toughest jobs with ease. The high torque output allows for rapid drilling and fastening, making it ideal for both woodworking and metalworking applications.

Incorporating advanced technology, the Harbor Freight 93762 features a variable speed control that allows users to adjust the speed to suit their specific needs. This versatility is crucial when working with different materials, as it offers precision and control required for delicate tasks, alongside the power needed for more demanding jobs.

Another standout characteristic of the 93762 is its ergonomic design. The handle is contoured for comfort, providing a secure grip that minimizes user fatigue during prolonged use. This thoughtful design enhances overall handling and maneuverability, making it easier to reach tight spaces and work in challenging angles.

The tool also comes equipped with a durable construction. Made from high-quality materials, the Harbor Freight 93762 is designed to withstand the rigors of regular use while maintaining its efficiency over time. This durability ensures that users can rely on the tool for years to come, making it a worthy investment for any toolbox.

Safety features are also a priority with this model. The built-in safety lock and protective casing provide additional security, allowing users to operate the tool with peace of mind. These features help to prevent accidental starts, ensuring a safer working environment.

In summary, the Harbor Freight Tools 93762 is a versatile, powerful, and user-friendly tool that caters to a broad range of applications. Its powerful motor, variable speed control, ergonomic design, and robust construction make it an ideal choice for professionals and DIYers alike. With the right combination of technology and features, this tool stands out as a reliable option for those looking to enhance their workspace efficiency. Whether tackling home improvement projects or professional jobs, the Harbor Freight 93762 delivers performance that users can trust.
Top Page Image Contents