Harbor Freight Tools 97896 To Install a Saw Blade, SKU For technical questions, please call

Page 11

If mounting onto a bench or other wooden surface:

1.Select four (4) 3/8” Bolts, eight (8) 3/8” Washers, and four (4) 3/8” Nuts* (not included).

*Screws and washers may be used instead, if desired.

2.Place the Table Saw in the location it will be mounted in. Make a mark in the center of each of the 4 mounting holes. Set the Saw aside.

3.WARNING! Before drilling the holes, make sure that there are no electric wires, cables, utility lines or other obstructions in the area to be drilled in.

4.Drill the holes straight down, large enough to allow your mounting hardware to fit.

5.Put the Saw in place and mount using the hardware mentioned above. Tighten all hardware securely before use.

To Install A Saw Blade

1.WARNING! Prior to installing a Saw Blade (3), make sure the Table Saw is disconnected from its electrical power source. To help prevent injury, heavy work gloves are recommended when installing and replacing the blade.

2.WARNING! Be very careful during blade tightening and loosening to avoid contact with the blade.

3.Unscrew the two Block Pins (147) located on the Guard Arm (149). Remove the Blade Guard (146) to expose the Saw Blade opening.

4.Remove the two screws (81) and remove the Table Insert (82).

5.Turn Control Wheel (51) counterclockwise to raise the motor to its uppermost position.

6.Turn Lock Knob (65) counterclockwise to loosen the tilt lock. Push Control Wheel in to engage the gears and rotate it counterclockwise to tilt the Spindle (10) to 15 degrees.

7.With the Open-end Wrench (167), hold the Inner Flange (4) and use the Box Wrench (166) to loosen the Blade Nut

(1). Then remove the Blade Nut and Outer Flange (2).

8.With the teeth of the Saw Blade pointing towards the front, tilt the Saw Blade to the left, lower it into the table and slide it onto the Spindle. Slide the Outer Flange over the Spindle (keeping the recessed face towards the Saw Blade.)

9.Attach the Blade Nut and finger-tighten.

Then use the Wrenches (one to hold the Inner Flange and the second to tighten the Nut.) WARNING! Do not overtighten.

NOTE: The Spindle has a right-hand thread and is secured when turned in a clockwise direction.

10.Once the Saw Blade (3) is secured, install (or replace) the Blade Guard (146).

SKU 97896

For technical questions, please call 1-800-444-3353.

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Table SAW For technical questions or replacement parts, please callFor technical questions, please call General Tool Safety WarningsSave This Manual Save all warnings and instructions for future referenceTable a 25’ 50’ 100’ 150’Outlets for 2-Prong Plug Grounding Instructions110-120 V~ Grounded Tools Tools With Three Prong Plugs 125 V~ 3-Prong Plug and OutletTable Saw Safety Warnings For technical questions, please call Stick Length Essential Straight Push-stick Features FunctionsDiagram not to scale Handle NotchVibration Safety For technical questions, please call Mounting Instructions SpecificationsInstructions for putting Into use UnpackingSKU For technical questions, please call To Install a Saw BladeMounting Post To Attach Blade Guard AssemblyTo Attach Fence Assembly To Raise And Lower Saw Blade To Adjust The Saw Blade AngleOperating Instructions Proper Placement Of Hands During Cutting Process To Adjust Width Of CutTable Saw Overload Protection Cleaning, Maintenance, Lubrication Maintenance ServicingMotor Assembly Diagram and Parts List Parts Table Assembly Diagram and Parts Parts Fence Assembly Mitre Gauge Assembly Blade Guard Assembly Assembly Diagrams and Parts List PartsRecord Product’s Serial Number Here Limited 1 year / 90 day Warranty

97896 specifications

The Harbor Freight Tools 97896 is a versatile and compact tool that has garnered attention for its practicality and robust features. Designed for both DIY enthusiasts and professionals, this tool offers a range of functionalities that make it an indispensable addition to any workshop or garage.

One of the standout features of the 97896 is its powerful motor, which provides reliable performance for various cutting tasks. This tool is designed to deliver consistent power, ensuring that users can tackle a wide range of materials, including wood, plastic, and even metal with ease. The motor’s efficiency not only enhances the overall cutting capability but also contributes to a longer tool lifespan, making it a cost-effective choice for users.

The 97896 incorporates advanced safety features that prioritize user protection during operation. These include a safety switch that helps prevent accidental activation and a durable housing designed to withstand the rigors of heavy use. Additionally, the tool is equipped with a comfortable grip that reduces hand fatigue, allowing for extended use without discomfort, making it ideal for prolonged projects.

Portability is another key characteristic of the Harbor Freight Tools 97896. Its lightweight design, coupled with its compact size, allows for easy transportation and storage. Users can conveniently move it from one job site to another or stow it away when not in use. This makes it an excellent option for contractors and mobile workers who need a dependable tool on the go.

Another notable technology integrated into the 97896 is its user-friendly interface. With straightforward controls, users can easily adjust settings to suit their specific tasks. Whether making fine cuts or quick modifications, the tool supports a seamless transition between functions, enhancing overall efficiency.

In summary, the Harbor Freight Tools 97896 stands out for its powerful performance, safety features, portability, and user-friendly design. It effectively combines practicality with advanced technology, making it well-suited for both professional contractors and do-it-yourselfers. Whether you are tackling home repairs or large construction projects, the 97896 promises to deliver reliable results, making it a worthwhile investment for anyone in need of a dependable cutting tool.
Top Page Image Contents