Harbor Freight Tools 97896 Operating Instructions, To Raise And Lower Saw Blade

Page 13

BLADE GUARD

FENCE (123)

 

 

LONG Nut (128)

 

Fence

 

Handle (132)

1.When cutting, the top edge of the Saw Blade (3) should rise about 1/4” above the top edge of the workpiece.

Figure E

3.Slip the Rear Plate (120) onto the top/ rear edge of the Work Table (86), lowering the Fence Assembly all the way onto the Table. Then, lock the Fence in position by lowering the Fence Handle (132) to a vertical position. See Figure E.

4.Grab the end of the Fence and try to lift it. If any free play is noted, very gently turn the Long Nut (128) in a clockwise direction while wiggling then end of the Fence until no more give is felt. Then turn the Long Nut another 1/8” to 1/4”.

Operating Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

To Raise And Lower Saw Blade

To prevent serious injury

from accidental operation:

Turn the Power Switch of the Table Saw to its “OFF” position and unplug the Saw from its electrical outlet before making any adjustments to the height of the Blade (3).

LOCK KNOB (65)

CONTROL

WHEEL

(51)

Figure F

2.To increase the Blade height, turn the Control Wheel counterclockwise. See Figure F.

To Adjust The Saw Blade Angle

1.The Table Saw is capable of making cuts from 45° to 90°.

2.The Table Saw also features an Angle Scale and Angle Indicator on the front side of the unit. See Figure F.

3.To adjust the angle of the Saw Blade (3), unlock the Lock Knob (65) by turning

it counterclockwise. Push the Control Wheel (51) inward to engage the gear, then turn it until the red pointer indicates the desired angle.

4.CAUTION! Due to its weight, the saw Blade will lower on its own. When an angle is set, hold the Control Wheel stationary with one hand and tighten the Lock Knob with the other hand.

5.Then, turn the Lock Knob clockwise to lock the Saw Blade in position.

SKU 97896

For technical questions, please call 1-800-444-3353.

Page 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Table SAW For technical questions or replacement parts, please callSave This Manual General Tool Safety WarningsSave all warnings and instructions for future reference For technical questions, please callTable a 25’ 50’ 100’ 150’110-120 V~ Grounded Tools Tools With Three Prong Plugs Grounding Instructions125 V~ 3-Prong Plug and Outlet Outlets for 2-Prong PlugTable Saw Safety Warnings For technical questions, please call Diagram not to scale Essential Straight Push-stick Features FunctionsHandle Notch Stick LengthVibration Safety For technical questions, please call Instructions for putting Into use SpecificationsUnpacking Mounting InstructionsSKU For technical questions, please call To Install a Saw BladeTo Attach Fence Assembly To Attach Blade Guard AssemblyMounting Post Operating Instructions To Adjust The Saw Blade AngleTo Raise And Lower Saw Blade Proper Placement Of Hands During Cutting Process To Adjust Width Of CutTable Saw Overload Protection Cleaning, Maintenance, Lubrication Maintenance ServicingMotor Assembly Diagram and Parts List Parts Table Assembly Diagram and Parts Parts Fence Assembly Mitre Gauge Assembly Blade Guard Assembly Assembly Diagrams and Parts List PartsRecord Product’s Serial Number Here Limited 1 year / 90 day Warranty

97896 specifications

The Harbor Freight Tools 97896 is a versatile and compact tool that has garnered attention for its practicality and robust features. Designed for both DIY enthusiasts and professionals, this tool offers a range of functionalities that make it an indispensable addition to any workshop or garage.

One of the standout features of the 97896 is its powerful motor, which provides reliable performance for various cutting tasks. This tool is designed to deliver consistent power, ensuring that users can tackle a wide range of materials, including wood, plastic, and even metal with ease. The motor’s efficiency not only enhances the overall cutting capability but also contributes to a longer tool lifespan, making it a cost-effective choice for users.

The 97896 incorporates advanced safety features that prioritize user protection during operation. These include a safety switch that helps prevent accidental activation and a durable housing designed to withstand the rigors of heavy use. Additionally, the tool is equipped with a comfortable grip that reduces hand fatigue, allowing for extended use without discomfort, making it ideal for prolonged projects.

Portability is another key characteristic of the Harbor Freight Tools 97896. Its lightweight design, coupled with its compact size, allows for easy transportation and storage. Users can conveniently move it from one job site to another or stow it away when not in use. This makes it an excellent option for contractors and mobile workers who need a dependable tool on the go.

Another notable technology integrated into the 97896 is its user-friendly interface. With straightforward controls, users can easily adjust settings to suit their specific tasks. Whether making fine cuts or quick modifications, the tool supports a seamless transition between functions, enhancing overall efficiency.

In summary, the Harbor Freight Tools 97896 stands out for its powerful performance, safety features, portability, and user-friendly design. It effectively combines practicality with advanced technology, making it well-suited for both professional contractors and do-it-yourselfers. Whether you are tackling home repairs or large construction projects, the 97896 promises to deliver reliable results, making it a worthwhile investment for anyone in need of a dependable cutting tool.
Top Page Image Contents