Harbor Freight Tools 97896 operating instructions Table Saw Overload Protection

Page 15

6.After the cut is under way, use the Push Stick (168) to continue guiding the workpiece forward. Just before the cut is near completion, move the left hand safely away from the workpiece and the Saw Blade (3). Then, continue pushing workpiece into Saw Blade with Push Stick, until the cut is complete. See Figure H.

7.Once the cut is complete, continue to maintain control of the workpiece. Turn the Switch (103) to its OFF position. Then, wait until the Saw Blade

(3) completely stops rotating before removing the workpiece.

Table Saw Overload Protection

1.The Table Saw is equipped with a Circuit Breaker (104). If the motor shuts off or fails to start due to overloading (cutting stock too fast, using a dull Saw Blade (3), low voltage, using the Table Saw beyond its capacity, etc.), turn the Switch

(103) to its OFF position. The Switch is also equipped with a safety pull that immediately triggers the circuit breaker.

2.Let the motor cool three to five minutes and reconnect the safety pull before pushing the Circuit Breaker button. This will reset the overload device. The motor can then be turned on again in the usual manner.

3.When stacking dado blades, you should be familiar with safe work practices and follow the directions of the blade manufacturer during dado cuts. Stacked dado blade thickness should not exceed 0.33”. Always make sure that all mating faces are clean and fee of sawdust and debris.

REV 10h

 

 

SKU 97896

For technical questions, please call 1-800-444-3353.

Page 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Table SAW For technical questions or replacement parts, please callFor technical questions, please call General Tool Safety WarningsSave This Manual Save all warnings and instructions for future referenceTable a 25’ 50’ 100’ 150’Outlets for 2-Prong Plug Grounding Instructions110-120 V~ Grounded Tools Tools With Three Prong Plugs 125 V~ 3-Prong Plug and OutletTable Saw Safety Warnings For technical questions, please call Stick Length Essential Straight Push-stick Features FunctionsDiagram not to scale Handle NotchVibration Safety For technical questions, please call Mounting Instructions SpecificationsInstructions for putting Into use UnpackingSKU For technical questions, please call To Install a Saw BladeTo Attach Blade Guard Assembly To Attach Fence AssemblyMounting Post To Adjust The Saw Blade Angle Operating InstructionsTo Raise And Lower Saw Blade Proper Placement Of Hands During Cutting Process To Adjust Width Of CutTable Saw Overload Protection Cleaning, Maintenance, Lubrication Maintenance ServicingMotor Assembly Diagram and Parts List Parts Table Assembly Diagram and Parts Parts Fence Assembly Mitre Gauge Assembly Blade Guard Assembly Assembly Diagrams and Parts List PartsRecord Product’s Serial Number Here Limited 1 year / 90 day Warranty

97896 specifications

The Harbor Freight Tools 97896 is a versatile and compact tool that has garnered attention for its practicality and robust features. Designed for both DIY enthusiasts and professionals, this tool offers a range of functionalities that make it an indispensable addition to any workshop or garage.

One of the standout features of the 97896 is its powerful motor, which provides reliable performance for various cutting tasks. This tool is designed to deliver consistent power, ensuring that users can tackle a wide range of materials, including wood, plastic, and even metal with ease. The motor’s efficiency not only enhances the overall cutting capability but also contributes to a longer tool lifespan, making it a cost-effective choice for users.

The 97896 incorporates advanced safety features that prioritize user protection during operation. These include a safety switch that helps prevent accidental activation and a durable housing designed to withstand the rigors of heavy use. Additionally, the tool is equipped with a comfortable grip that reduces hand fatigue, allowing for extended use without discomfort, making it ideal for prolonged projects.

Portability is another key characteristic of the Harbor Freight Tools 97896. Its lightweight design, coupled with its compact size, allows for easy transportation and storage. Users can conveniently move it from one job site to another or stow it away when not in use. This makes it an excellent option for contractors and mobile workers who need a dependable tool on the go.

Another notable technology integrated into the 97896 is its user-friendly interface. With straightforward controls, users can easily adjust settings to suit their specific tasks. Whether making fine cuts or quick modifications, the tool supports a seamless transition between functions, enhancing overall efficiency.

In summary, the Harbor Freight Tools 97896 stands out for its powerful performance, safety features, portability, and user-friendly design. It effectively combines practicality with advanced technology, making it well-suited for both professional contractors and do-it-yourselfers. Whether you are tackling home repairs or large construction projects, the 97896 promises to deliver reliable results, making it a worthwhile investment for anyone in need of a dependable cutting tool.
Top Page Image Contents