Harbor Freight Tools 97896 operating instructions For technical questions, please call

Page 6

•Fence must be completely parallel to the saw blade.

•Workpiece must be free from flaws

(such as loose knots) and from foreign objects (such as nails and screws).

•Support large workpieces along their entire length. Large workpieces tend to bend, grabbing the blade.

•Do not use a dull, damaged, or pitch- covered blade.

•Do not use fence as a guide when crosscutting.

•Do not ripcut a twisted or warped workpiece, or workpiece without straight edge to guide along fence.

•Maintain control of the workpiece. Do not allow the workpiece to rest against the moving blade without holding onto it.

•If the blade binds or a cut is interrupted, turn off the power switch and hold the workpiece still until the blade stops. Correct the cause of blade binding before proceeding.

•Before continuing an unfinished cut, center the blade in the pre-cut kerf and check that the saw teeth are not engaged into the workpiece before turning on the saw.

•Push the wood stock past the blade prior to release.

11.Check guards for proper operation with saw disconnected from power before each use. Do not disable any guard. Do not operate saw if any movable guard does not move freely and close instantly. Make sure any movable guard does not touch the blade in all angles, depths of cut, and positions.

12.Keep the guard in place while through- sawing. Verify that the spreader lines up with the blade to prevent binding.

13.Construct an appropriate Push Stick out of wood according to the guidelines on the following page.

SKU 97896

For technical questions, please call 1-800-444-3353.

Page 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents For technical questions or replacement parts, please call Table SAWSave all warnings and instructions for future reference General Tool Safety WarningsSave This Manual For technical questions, please call25’ 50’ 100’ 150’ Table a125 V~ 3-Prong Plug and Outlet Grounding Instructions110-120 V~ Grounded Tools Tools With Three Prong Plugs Outlets for 2-Prong PlugTable Saw Safety Warnings For technical questions, please call Handle Notch Essential Straight Push-stick Features FunctionsDiagram not to scale Stick LengthVibration Safety For technical questions, please call Unpacking SpecificationsInstructions for putting Into use Mounting InstructionsTo Install a Saw Blade SKU For technical questions, please callTo Attach Blade Guard Assembly To Attach Fence AssemblyMounting Post To Adjust The Saw Blade Angle Operating InstructionsTo Raise And Lower Saw Blade To Adjust Width Of Cut Proper Placement Of Hands During Cutting ProcessTable Saw Overload Protection Maintenance Servicing Cleaning, Maintenance, LubricationMotor Assembly Diagram and Parts List Parts Table Assembly Diagram and Parts Parts Assembly Diagrams and Parts List Parts Fence Assembly Mitre Gauge Assembly Blade Guard AssemblyLimited 1 year / 90 day Warranty Record Product’s Serial Number Here

97896 specifications

The Harbor Freight Tools 97896 is a versatile and compact tool that has garnered attention for its practicality and robust features. Designed for both DIY enthusiasts and professionals, this tool offers a range of functionalities that make it an indispensable addition to any workshop or garage.

One of the standout features of the 97896 is its powerful motor, which provides reliable performance for various cutting tasks. This tool is designed to deliver consistent power, ensuring that users can tackle a wide range of materials, including wood, plastic, and even metal with ease. The motor’s efficiency not only enhances the overall cutting capability but also contributes to a longer tool lifespan, making it a cost-effective choice for users.

The 97896 incorporates advanced safety features that prioritize user protection during operation. These include a safety switch that helps prevent accidental activation and a durable housing designed to withstand the rigors of heavy use. Additionally, the tool is equipped with a comfortable grip that reduces hand fatigue, allowing for extended use without discomfort, making it ideal for prolonged projects.

Portability is another key characteristic of the Harbor Freight Tools 97896. Its lightweight design, coupled with its compact size, allows for easy transportation and storage. Users can conveniently move it from one job site to another or stow it away when not in use. This makes it an excellent option for contractors and mobile workers who need a dependable tool on the go.

Another notable technology integrated into the 97896 is its user-friendly interface. With straightforward controls, users can easily adjust settings to suit their specific tasks. Whether making fine cuts or quick modifications, the tool supports a seamless transition between functions, enhancing overall efficiency.

In summary, the Harbor Freight Tools 97896 stands out for its powerful performance, safety features, portability, and user-friendly design. It effectively combines practicality with advanced technology, making it well-suited for both professional contractors and do-it-yourselfers. Whether you are tackling home repairs or large construction projects, the 97896 promises to deliver reliable results, making it a worthwhile investment for anyone in need of a dependable cutting tool.
Top Page Image Contents