Grounding
To prevent electric shock
and death from incorrect grounding wire connection: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See
3.The grounding prong in the plug is connected through the green wire inside the cord to the ground- ing system in the tool. The green wire in the cord must be the only wire connected to the tool’s grounding system and must never be attached to an electrically “live” terminal. (See
4.The tool must be plugged into an appropriate outlet, properly installed and grounded in accor- dance with all codes and ordinanc- es. The plug and outlet should look like those in the preceding illustration.
(See 3-Prong Plug and Outlet.)
Double Insulated Tools: Tools
Grounded Tools: Tools with Three with Two Prong Plugs Prong Plugs
1.This Tile Saw comes with a 3-prong power cord.
2.Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a
1.Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA require- ments and complies with the applica- ble standards of Underwriters Labo- ratories, Inc., the Canadian Standard Association, and the National Electri- cal Code. (See Outlets for
SKU 3733 | For technical questions, please call | Page 10 |