situations that may occur. It must be understood by the operator that common sense and caution are fac- tors which cannot be built into this product, but must be supplied by the operator.
Abrasive Cutting-Off Operation
Safety Warnings
1.This power tool is intended to function as a
2.DO NOT EXPOSE TO RAIN OR USE IN DAMP LOCATIONS.
3.Specific Cautions:
a.Wear
b.Use splash hood for every operation for which it can be used.
c.Disconnect saw before servicing, when changing cutting wheel and cleaning.
d.Use only with
e.Replace damaged cutting wheel before operating.
4.Operations such as grinding, sanding, wire brushing, polishing are not recommended to be per- formed with this power tool. Opera- tions for which the power tool was not designed may create a hazard and cause personal injury.
5.Do not attempt to free a stalled blade without turning the Tile Saw
OFF first. If the blade stalls, turn the power switch to the OFF position im- mediately to prevent damage to the motor.
6.Do not use accessories which are not specifically designed and recommended by the tool manu- facturer. Just because the accessory can be attached to your power tool, it does not assure safe operation.
7.The rated speed of the accessory must be at least equal to the maxi- mum speed marked on the power tool. Accessories running faster than their RATED SPEED can break and fly apart.
8.The outside diameter and the thickness of your accessory must be within the capacity rating of your power tool. Incorrectly sized accessories cannot be adequately guarded or controlled.
9.Wear personal protective equip- ment. Depending on application, use face shield, safety goggles or safety glasses. As appropriate, wear dust mask, hearing protec- tors, gloves and workshop apron capable of stopping small abra- sive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations such as safely goggles or glasses. The dust mask or respirator must be capable of filtrating particles generated by your opera- tion. Prolonged exposure to high in- tensity noise may cause hearing loss.
10.Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective equipment.
SKU 3733 | For technical questions, please call | Page 8 |