Sennheiser L151-10 Charging a stethoset receiver/ spare accupack, Starting the charging process

Page 8

Charging a stethoset receiver/ spare accupack

• Insert the receivers into the charging compartments of the

L 151-10, the accupacks remain in the receivers.

• Alternatively, individual

BA 151 spare accupacks can be charged in small charging compartments integrated into the side of the main charging compartments for the receivers. However, it is only possible to insert either an individual accupack or a receiver containing an accupack into the charging compartment (not both together).

Starting the charging process

By pressing the button, the „normal“ charging process begins. The red LED goes off briefly and the charging process is indicated by the red control LEDs at the occupied charging com- partments. The automatic charging process (timer-controlled) will be completed after 8 hours. The device then switches to trickle charging.

Essential notes

The charging process („CHARGE“) cannot be interrupted. By pressing the button again, the charging timer is reset and the charging process starts over again.

A power failure also resets the charging timer and the charging process starts over again.

Switch off the receivers before starting the charging process! For additional information on the use of the receivers, please refer to the corresponding operating instructions.

Place the charging unit on a flat surface in order that the contacts of the receivers are securely connected to the charging unit.

8

Image 8
Contents 151-10 Page Inbetriebnahme 151-10Anschluß Wichtige Hinweise LadenLadung starten Mehrere Ladeleisten zusammenschalten Schrauben wieder einsetzen und festziehenTechnische Daten LieferumfangLieferbare Netzteile Ersatzakku für Kinnbügel- /KopfhörerempfängerPower supply Putting the charging unit into operationEssential notes Charging a stethoset receiver/ spare accupackStarting the charging process Cascading several charging units Technical data Supply scheduleAvailable mains units Spare accupack for stethoset receiversMise en service AlimentationRemarques importantes Charge des récepteurs stéthoscopiques/des accusDémarrer la charge Relier plusieurs réglettes de recharge Caractéristiques techniques ContenuBlocs-secteur disponibles Accu supplémentaire pour récepteur stéthoscopiqueMessa in funzione L151-10Collegamento Ricarica Avvio della ricaricaCollegamento di più basi di ricarica Dati tecnici DotazioneAlimentatori disponibili Accumulatori di ricambio per ricevitori sottomento/ cuffieConexión Puesta en servicioAvisos importantes CargarIniciar la carga Acoplamiento de varias regletas de carga Volumen de suministro Datos técnicosTransmisores de mando suminsitrables Pila de reserva para auriculares / receptores de barbillaAansluiting InbedrijfstellingBelangrijke instructies OpladenOpladen starten Meerdere laadstrippen aan elkaar koppelen Technische gegevens LeveringsomvangLeverbare netvoedingen Reserve-accu voor kinbeugel-/hoofdtelefoonontvanger