Selecting the Fan Speed
AUTO
SET TEMP.
CLOCK
SPEED AUTO LOW MED HIGH
A08036
The fan speed can be selected by pressing the FAN SPEED button. NOTE: When the unit is on, the fan will run continuously in cooling or heating. When in heating, there might be situations where the fan will slow down or shut off to prevent cold blow.
Selecting the Horizontal Direction Louver Position
In order to optimize comfort, the horizontal louver will operate in a preset range as shown in the figure below.
COOLING
HEATING
A08044
The horizontal louvers can be adjusted using the remote control and can be set to be stationary or moving continuously.
Air Direction
Press the AIR DIRECTION button repeatedly to choose one of the louver positions.
Every time the air direction button is pushed, the louver will swing by 6 degrees.
In the Cooling, Dehumidification, and Fan Only mode, the louver will swing in the cooling range. In the Heating mode, the louver will swing in the heating range.
NOTE: Always use the remote control to adjust the louver position, otherwise abnormal operation may occur. If the louver is manually adjusted out of its range, turn the unit off and then on again.
Auto Swing
To have the louver moving continuously, push the SWING button. Push again to stop the louver.
Selecting Vertical Direction of the Louver
The vertical louvers can be adjusted manually to direct the airflow to achieve the optimal comfort in the space.
A07543
Timer Function
TIMER ON (to start the unit) and TIMER OFF (to stop the unit) can be used separately or together.
Timer ON only
AUTO
SET TEMP.
CLOCK
TIMER ON 
SPEED AUTO
A08037
This function will allow the unit to start automatically at the set time. The TIMER ON can be set while the unit is on or off.
UNIT ON
-Press the TIMER button once. The current time flashes next to the TIMER ON display on screen. Press the temp Y button or temp B button to set the desired “TIME ON”. Every time the Y or B button is pushed, the time increases or decreases by 10 minutes.
-When the TIMER ON is set, the TIMER light on unit illuminates. The unit will shut off and will start again at the set time.
UNIT OFF
-Set the timer described in the UNIT ON section.
-The unit will start at the set time.
To cancel TIMER setting, press the CANCEL button.
Timer OFF only
AUTO
SET TEMP.
CLOCK
TIMER OFF 
SPEED AUTO
A08040
This function will allow the unit to stop automatically at the set time. The timer can be set while the unit is on or while it is off.
UNIT ON
-Press the TIMER button twice. The current time flashes next to the TIMER OFF display on screen. Press the temp Y button or temp B button to set the desired “TIME OFF”. Every time the Y or B button is pushed, the time increases or decreases by 10 minutes.
-When the TIMER OFF is set, the timer light on the unit illuminates and the unit turns off automatically at the set time.
UNIT OFF
-Set the TIMER off as described in the UNIT ON section.
-The unit will turn on and will turn off at the set time.
-If TIMER OFF is canceled (by pushing the cancel button), before the set time elapses, the unit will continue running.
7